Frequency range

DC - 50 MHz

Input impedance

50 Ω or 1 MΩ || 20 pF

Input noise voltage

5 nV/√Hz (above 10 kHz)

Dynamic reserve

120 dB

Input range

±3.3 V

Input AC range

±1.5 V (with DC coupling)

Input full range sensitivity

1 nV to 1.5 V

A/D conversion

14 bits, 210 MSa/s

Frequency   range

DC - 50 MHz

Output ranges

±10 mV, ±100 mV, ±1 V, ±10 V

Signal adder

±10 V, DC to   50 MHz bandwidth

D/A conversion

16 bits, 210 MSa/s

Number of demodulators

6 dual-phase

Output sample rate

On USB: up to 460 kSa/s
  On auxiliary outputs: 1 MSa/s

Filter time   constant

1 µs - 500 s

Filter bandwidth

80 µHz - 220 kHz

Filter slope

6, 12, 18,   24, 30, 36, 42, 48 dB/Oct

X, Y, R, Theta

64-bit full range

Reference   frequency resolution

0.7 µHz

Reference phase angle resolution

1.0 µ°

Input channels

Signal inputs, signal outputs

Scope modes

Time domain, frequency domain (FFT)

Number of display channels

1

Trigger channels

Signal inputs, signal outputs, oscillator phases, DIOs

Trigger modes

Edge

Sampling rates

6.4 kSa/s to 210 Msa/s

Vertical resolution

14 bits

Maximum number of samples per shot

2048

Bandwidth   limit mode, vertical resolution increase

Sample decimation,   averaging

Cursor math

Location, area, wave, peak, tracking, histogram

Center   frequency range

0 - 50 MHz

Spectrum modes

FFT(X+iY), FFT(R), FFT(Θ), FFT(f) and FFT((dΘ/dt)/2π)

Statistical options

Amplitude, spectral density, power

Averaging modes

None, exponential moving average

Maximum number of samples per spectrum

8.4 MSa

Maximum span

460 kHz

Window functions

Rectangular,   Hann, Hamming, Blackman Harris

Cursor math

Location, area, wave, peak, tracking, histogram

Scan parameters

Oscillator frequency, demodulator phase shift,   auxiliary offset, signal output amplitudes, etc.

Parameter sweep ranges

Full range, linear, logarithmic

Parameter sweep resolution

Arbitrary, defined by start/s value, number of sweep   points

Display parameters

Demodulator output (X, Y, R, Θ, f), auxiliary input

Display options

Single plot, dual plot (e.g., Bode plot), multi-trace

Statistical options

Amplitude, spectral density, power

Preset measurement modes

Parameter sweep, noise amplitude measurement, frequency response analyzer, 3-omega-sweep

High-speed outputs

4 channels, ±10 V, amplitude, phase, frequency, X/Y, or   user-defined

D/A converter

16 bits, 1 MSa/s

D/A analog bandwidth

200 kHz

High-speed inputs

2 channels, ±10 V

A/D converter

16 bits, 400   kSa/s

A/D analog bandwidth

100 kHz

Host connection

USB 2.0, 480 Mbit/s

Pre-amplifier control bus

ZCtrl proprietary bus to control external   pre-amplifiers

Synchronization bus

ZSync   proprietary bus to locally interconnect ZI instruments

Digital I/O

32 bits, general purpose

Dimensions

45 x 35 x 10 cm (19" rack)

Weight

6.2 kg

Power supply

110-120 V, 220-240 V, 50/60 Hz

Operating temperature

+5 °C to +40 °C

Operating environment

IEC61010, indoor location, installation category II,   pollution degree 2

Operating altitude

Up to 2000 m

Internal oscillator output

Sine, ±1 V, 10 MHz

Internal oscillator initial accuracy

±1.5 ppm

Internal oscillator temperature coefficient

0.05 ppm/C