一、智能化强

1、可以监控每个工件的加热的温度曲线，电流电压曲线、计数等，存储记忆并打印出来。

2、可以存储设置多个工件的加热工艺参数，换取不同工件的时候，无需再行调试直接调取使用。

3、可以设置多段时间功率加热、日佳数字机器具有5段时间功率控制功能。模拟机器一般只有两段时间和两个功率电位器调节。

4、预留温度、速度及其他控制传感器接口，来满足客户所需要加热工艺要求。也可以根据客户要求定制多段加热恒温恒功率等功能特殊机型。

5、具有上网功能。通过wifi可以与手机或者电脑连接，具有远程操作控制及数据采集功能。也便于厂家远程指导维修功能。

I.More intelligent

1.It can monitor the heating temperature curve of each workpiece,current voltage curve,count,etc.,store memory and print it out.

2.Can store the heating process parameters of multiple workpieces.After exchange for different workpieces,Just adopt the parameter from the storage.

3.Ri Jia digital machine are equipped with multi-stage power heating and have five time power control functions.Typically products in the market only have two periods of time and two power potentiometers.

4.RI Jia products are equipped with temperature,speed and other control sensor interfaces to meet all the heating process requirements.We can also customize multi-stage heating and constant power and other special models according to customers'requirements.

5.Have the Internet function.Ri Jia products can be connected with phone or computer in the WiFi environment,which can support remote operation control and data acquisition function.It is very convenient for manufacturers to supply maintenance service.

二、应用广

1、工作频率范围宽：日佳加热设备频率500HZ—200KHZ、在以上频段日佳加热设备都可以做到佳功率输出。模拟机工作频率范围窄一般都在10KHZ左右，超过这个频率范围功率都会变小或者不工作。

2、加热负载范围宽、轻重负载都可以达到佳匹配输出、一台机器可以加热导磁性强的金属钢铁等负载重的工件，也可以导磁性弱金属铝铜等负载轻的工件大功率加热。而模拟机器则需要配置不同的两台机器才能完成。

2.Widely application

1.Wide range of working frequency:the frequency of Ri Jia products heating equipment is 500HZ--200KHZ,ａnd the optimal power output can be achieved at that frequency range.The operating frequency range of the simulator is generally around 10KHZ,so beyond the frequency range,it will be smaller or does not work.

2,wide range of heating load,heavy load.We can ensure the best match output,a machine can heat conductivity magnetic metals such as steel strong negative load artifacts,can also be weak magnetic conductivity of aluminum copper light artifacts and high-power heating load.The simulation machine requires two different machines to complete.

三、质量好

1、电压方面：电压可以实时监控显示控制等功能，无论功率多大频率多高，槽路电压都是控制在900V电压之内。电压低于常见机器的三到十倍，排除了因电压高打火造成输出变压器与功率模块IGBT易损坏的情况。抗恶劣环境也得以提高。

2、电流方面：电流可以实时监控显示控制等功能，IGBT电流工作在额定电流的80%之内，电流控制采样按照每一次脉冲检测一次槽路电流，这样即不会超过它的额定电流，又保证了模块不易损坏。在逆变输出存在异常情况下强制停止工作。保证了设备的可靠性。

3、日佳加热设备采用模块化设计，减少了硬件电路，布局简单合理，减少了故障源。异常现象主要用软件控制保护，比硬件提高了保护响应时间，很好的提高了机器的安全性能。

Excellent quality

1.Voltage:the voltage can be monitored and displayed in the screen.No matter how high the power is and the channel voltage is controlled under 900V voltage.The voltage is one third to ten percent of that of the common machine,which eliminates the damage to the output transformer and the power module IGBT due to high voltage.The resistance to harsh conditions has also improved.

2,Electric current:monitored and displayed in the screen,IGBT current work within 80%of the rated current,current control sampling according to each time a tank circuit current pulse detection,which does not exceed its rated current,ａnd ensure that the module is not easy to damage.When the inverter output is abnormal,it will not work.The reliability of the equipment is guaranteed.

3.The Ri Jia products heating equipment adopts the modular design,which reduces the hardware circuit,the layout is simple and reasonable,ａnd the fault source is reduced.The abnormal phenomenon is mainly protected by software,which improves the response time and improves the safety performance of the machine.

四、节能多

1、日佳感应加热具有变频功能，可以根据工件智能变频，达到节能的效果。

2、日佳设备全数字化控制，用软件代替了很多硬件控制部分，减少了元件发热，降低了功耗。

3、可以定制智能化加热设备，比如感应器内有工件的时候按照设置好的的功率加热，没有工件自动转换维持机器工作的小电流状态。这样不仅降低了功耗，也减少了操作工的工作强度及频繁启动设备。

4、日佳全数字变频感应加热一般比老式模拟机器节能5%~50%。

4.Saving more Energy

1.Ri Jia products induction heating has the function of frequency conversion,which can achieve energy saving effect according to the intelligent frequency conversion of the workpiece.

2.Digital control system,replace many hardware control parts by software,reduce the heating of components and lower power consumption.

3.We can customize the intelligent heating equipment,when the workpiece is in,it is heated according to the set power,ａnd there is no workpiece,it will maintain the minimum current state.This function will not only reduce the power consumption,but also reduce the operator's work intensity and the frequency of the start and off of the equipment.

4.Ri Jia products digital frequency conversion induction heating is generally 5%~50%less energy efficient than the old analog machine.

五、寿命长

1、日佳电路设计的逆变电压很低，这样不光是抗恶劣环境也延长了使用寿命。

2、去掉电解滤波电容改用无极薄膜电容，因为电解电容一般寿命在10年左右，而薄膜电容寿命比它要高几倍，大大提高了机器的寿命。

3、可以定制全封闭机器，用十年后内部依然如新。

Durable in use

1.Ri Jia products inverter voltage is very low,so it is not only the anti-harsh environment but also extends the service life.

2.Remove the electrolytic filter capacitor and switch to a non-polar film capacitor,because the electrolytic capacitor generally lives about 10 years,ａnd the life of the film capacitor is several times higher than that,which greatly improves the life of the machine.

3.We can customize the fully enclosed machine,ａnd it will remain new after 10 years.