DS豪华立式控制柜
·工艺特点介绍
1、柜门离地25mm
2、2.5mm厚的安装板，两边有20mm宽的U形弯边，使得安装板强度更大，也便于搬运
3、箱底三块电缆导入盖板，可以相互替换，移动方便，易于导入电缆，易于开孔进线
4、箱门上有接地螺栓
5、承重铰链安装容易，换柜门也容易。柜门可开启130°
6、塑料滑引器可利用塑料滑引器通过导轨，可从柜体正面将安装板推入柜内
7、坚固的长方形框架不但可以加强前门的强度，还可以用来固定安装电器元件（配合门安装横条使用）
8、背板能很容易地安装，用螺丝固定；还可换装柜门
9、MS830锁，上、中、下三点锁紧柜门
10、密封圈：聚氨脂发泡密封胶条，确保防护等级
11、柜门框处增加防水边与柜门密封圈配合防止水和灰尘落入柜内
12、（单门）左右互换开门设计，方便使用
13、标准模数化安装孔设计，方便安装
14、内灯，方便安装和检测（自选件）
15、文件袋，方便现场工作（自选件）
16、安装梁，不使用安装板同样可以进行柜内安装（自选件）
17、风机及过滤网，保证柜内通风，防护等级IP54（自选件）
18、底座，固定式，活动式，拆卸、安装都很方便（自选件）
19、双安装板，安装容量大（自选件）
20、门安装条，方便安装
21、柜体全框架侧板、前后门和顶板、底板均可取下，能够适应各种要求，方便安装检修
·Install panel strip
1. Cabinet door is 25mm above the ground.
2. 2.5mm thick installation plate, both sides with U curve 20 mm width, making installation plate more strengthful, for easy transportation.
3. Three box bottom cable entrance cover plate, can be interchanged, move conveniently, easily conducting cable, easy to open hole for cable entrance.
4. There are ground bolt on the cabinet door.
5. Bearing hinge, install easily, also change cabinet door easily. Cabinet door can open 130°.
6. Plastic slip inducer makes use of plastic slip inducer over guiding rail, can push installation plate inside the cabinet from front.
7. Rigid rectangular frame can not only strengthen the strength of front door, but can also be used to fix installed electric appliance component (with the usage of horizontal door installation strip).
8. Back plate can be installed easily, fixed with screw; cabinet door can also be changed.
9. MS830 lock can lock cabinet from top, middle and bottom three points.
10. Seal ring: polyurethane sealing strip insures protection grade.
11. Cabinet side frame added with sealing rings between water resistant side and cabinet door to prevent water and dust from entering cabinet.
12. (Single door) left-right interchangeable opening design for easily usage.
13. Standardized modular installation hole design, convenient installation.
14. Internal light, convenient installation and inspection(selective)
15. Document bag, convenient site work(selective)
16. Installation beam, can also perform inside installation without installation plate(selective)
17. Fan and filter element, ensure well cabinet inside ventilation, protection grade IP54(selective).
18. Base, fixed and detachable, convenient disassembly and installation (selective).
19. Double installation plate, big installation capacity(selective).
20. Door installation strip, convenient installation.
21.All cabinet body side frame plate, front and back door and top plate as well as bottom plate can be removed, meet various requirement for easy installation and maintenance.
序号
no | 规格型号
model | 高
height
(mm) | 宽
width
(mm) | 深
depth
(mm) | 序号
no | 规格型号
model | 高
height
(mm) | 宽
width
(mm) | 深
depth
(mm) |
| 01 | DS166040 | 1600 | 600 | 400 | 17 | DS201080 | 2000 | 1000 | 800 |
| 02 | DS168050 | 1600 | 800 | 500 | 18 | DS201260 | 2000 | 1200 | 600 |
| 03 | DS161250 | 1600 | 1200 | 500 | 19 | DS201280 | 2000 | 1200 | 800 |
| 04 | DS186040 | 1800 | 600 | 400 | 20 | DS201250 | 2000 | 1200 | 500 |
| 05 | DS186050 | 1800 | 600 | 500 | 21 | DS217050 | 2100 | 700 | 500 |
| 06 | DS187050 | 1800 | 700 | 500 | 22 | DS226050 | 2200 | 600 | 500 |
| 07 | DS188050 | 1800 | 800 | 500 | 23 | DS228050 | 2200 | 800 | 500 |
| 08 | DS188040 | 1800 | 800 | 400 | 24 | DS221050 | 2200 | 1000 | 500 |
| 09 | DS181040 | 1800 | 1000 | 400 | 25 | DS221250 | 2200 | 1200 | 500 |
| 10 | DS181240 | 1800 | 1200 | 400 | 26 | DS226060 | 2200 | 600 | 600 |
| 11 | DS206050 | 2000 | 600 | 500 | 27 | DS228060 | 2200 | 800 | 600 |
| 12 | DS208050 | 2000 | 800 | 500 | 28 | DS221060 | 2200 | 1000 | 600 |
| 13 | DS201050 | 2000 | 1000 | 500 | 29 | DS221260 | 2200 | 1200 | 600 |
| 14 | DS201060 | 2000 | 1000 | 600 | 30 | DS228080 | 2200 | 800 | 800 |
| 15 | DS208060 | 2000 | 800 | 600 | 31 | DS221080 | 2200 | 1000 | 800 |
| 16 | DS206060 | 2000 | 600 | 600 | 32 | DS221280 | 2200 | 1200 | 800 |
DS安装板示意图 DS installation sketch
·DS标准配置
1、安装板一块
2、前单开门后背板
3、安装纵梁两根
4、无侧板
5、门安装条两根
6、简易包装
·DS standard configuration
1. One installation plate
2. One front single opening back plate
3. Two installation stringers
4. Without side plate
5. Two door installation strips
6. Simple packing
柜体颜色
RAL7032
材料
冷轧钢板
门2.0mm
箱体1.5mm
安装板2.5mm
表面处理
磷化、喷塑
防护等级IP54
Cabinet color
RAL7032
Materials
Cold rolled steel plate
Door 2.0 mm
Cabinet body 1.5 mm
Installation plate 2.5 mm
Surface treatment
Phosphating, plastic spraying
Protection grade IP54
