全新一代耐电压击穿试验机，电气强度优质厂家

(BDJC-50KV)

全新一代耐电压击穿试验机，电气强度优质厂家适用范围：

   主要适用于固体绝缘材料（如：塑料、橡胶、层压材料、薄膜、树脂、云母、陶瓷、玻璃、绝缘漆等绝缘材料及绝缘件）在工频电压或直流电压下击穿强度和耐电压的测试。

   由电脑控制，是我公司自主研发的全新第三代介电击穿检测仪器，电子控制系统是通过西门子PLC控制，数据采集方式通过光电隔离，有效解决试验过程中的抗干扰问题，软件操作使用方便，能够实时显示动态曲线，同时升压速率无级可调，可以根据自己的需要进行升压速率调节，调节范围在10V-5000V/S，处于国内*地位（国内*能达到此功能的厂家），使升压速率真正做到匀速、准确，并能够准确测出漏电电流的数据。可实时绘制试验曲线，显示试验数据，判断准确，并可保存，分析，打印试验数据。

注意事项：

1、仪器安装时应具有独立的接地线。
2、在开机前，操作者要首先熟悉操作方法。
3、仪器不能在有强烈腐蚀性气体及有颗粒杂质的气体环境中使用。
4、试验环境温度15度到25度之间，相对湿度60％到70％之间
5、试样击穿瞬间有火花产生并伴有声响，属正常现象。
6、每次更换试样或接触高压电极时必须用高压放电棒对高压电极进行放电，放电时间5秒以上。
7、每次进行试验前，必须检查仪器接地

软件功能:
01、软件平台：WINDOWS窗口操作平台，界面直观，便于操作
02、曲线显示：在实验过程中可以动态显示试验曲线
03、数据导出：可以对试验结果导入EXCEL表格
04、实验报告：可以人为设置报告名称，并对实验报告进行打印
05、试验方式：可以根据需求对直流试验和交流试验进行灵活选择
06、试验方法：可以根据需求自行选择击穿电压、耐压试验、梯度试验
07、参数设置：可以根据不同的试验方式及试验方法灵活设置所需的不同参数值
08、试样设置：可对不同标准的试样参数灵活设置
09、人员管理：设置用户名及密码，不同的操作员登入进行不同的试验，互不影响
10、标准选择：含有不同标准，可根据需求自行选择
11、连续操作：连续操作试验时，可直接在软件里结束试验，进行二次试验

技术要求：

01、输入电压： 交流220 V

02、输出电压： 交流 0--50 KV 

                   直流0—50 KV   

03、电器容量： 3KVA

04、击穿zui大输出电流：100mA  30mA （可调换）

05、高压分级： 0--5KV； 0-10KV；0-30KV; 0-40KV; 0-50KV,0-50KV;

06、升压速率： 10V/S 100V/S  200V/S  500V/S  1000V/S 2500V/S 3000V/S   

07、试验方式：

           直流试验：1、击穿试验 2、梯度升压  3、耐压试验 

           交流试验：1、击穿试验  2、梯度升压  3、耐压试验

08、击穿判停方式：1、电压判停 2、电流判停

09、电压试验精度： ≤ 1％

10、试验方式：1、绝缘试样空气中试验2、绝缘试样浸油中试验

11、黄铜电极规格： ￠25mm 两个   ￠75mm一个

12、主机尺寸：长宽高约700*800*1500（MM）

14、防护罩材质：有机玻璃

15、设备重量：约120KG

主要配置：

1、 试验主机一台
2、 5万伏高压发生器一台
3、 全自动微电脑电压调压装置一套(串口方式)
4、 试验电极规格(紫铜)
5、 试验用油盒一只：材质为有机玻璃
6、 电磁自动放电装置一套。
7、 电压击穿计算机测控软件一套
8、 计算机一套(抗强干扰计算机) 
9、彩色喷墨打印机一台(惠普品牌)
10、*计量鉴定质检证书一份
11、产品使用说明书一份
12、合格证一份 

产品特点：

1、运行于WIN  XP/WIN7/WIN8系统下的独立安装软件，界面友好，操作简单

2、实验显示曲线，数据自动储存，自动查找

3、多种用途可以进行交、直流试验试验准确、可靠、安全

4、计算机控制试验过程，自动判断停止，自动复位

5、超压、过流、短路、漏电、误操作等多种保护

操作步骤：

1、试验前的准备：
1）打开试验机右侧的总电源开关,预热15分钟。
2）打开计算机进入Windows系统。双击本仪器软件的快捷图标打开试验登录界面输入登录密码即可进入试验界面。
2、交直流试验的切换
1）本仪器高压输出为交流电压。直流的获得方式为在原回路中串入高压硅堆，使测试回路为脉动的直流电压。实现的过程为，硅堆已经在高压变压器的高压绝缘塔中，平时用一个短路杆把高压硅堆短接。需要直流试验时，取出短路杆，使高压硅堆接入测试电路中，这时回路的电压为脉动的直流电压。
2）前面板直流交流选择按钮。该按钮的状态不能改变设备输出的电压性质。按下该按钮，设备仅仅是把直流报警电路接入。指示用户，当打开箱门时，您需要对高压均压球放电。转动放电杆，使放电杆的端部铜球接触高压均压球。建议用户每次放电铜球接触高压均压球时间大于五秒。
3）试验的交直流电压切换，主要取决于高压绝缘塔中的短路杆是否取出。当取出短路杆时，高压均压球上的电压为直流电压，插入短路杆时，高压均压球上的电压为交流电压。短路杆的取出、插入参看左侧的示意图。
4）在直流试验时，计算机也要选择直流状态，否则测的结果是不正确的。简单的说，交流电压与直流电压有倍的关系。

Scope of application:
Mainly used in solid insulating materials (such as: plastic, rubber, lamination material, film, resin, mica, ceramic, glass, insulating paint and other insulation materials and parts) in the frequency of the voltage or DC voltage breakdown strength and voltage withstand test.
Controlled by computer, is my company independent research and development of the all new 3rd generation dielectric breakdown testing instrument, electronic control system is controlled by Siemens PLC, data acquisition through a photoelectric isolation, effectively solve the problems of anti interference in the process of test, software is convenient to operate and use to real-time display dynamic curve, also boost speed stepless adjustable can according to their own needs of pressurization rate regulation, regulating range in 10V-5000V/S, in the domestic leading position (the only way to achieve the function of manufacturers), so that the pressure rate truly uniform and accurate, and can accuray measure the leakage current data. Can draw the test curve in real time, display the test data, judge accuray, and can save, analysis, print the test data.
Matters needing attention:
1, the instrument installation should have a separate ground wire.
2, before the start, the operator must first familiar with the operation method.
3, the instrument can not have a strong corrosive gas and particulate impurities in the gas environment to use.
4, the test environment temperature of 15 degrees to 25 degrees, the relative humidity between 60% to 70%
5, the sample breakdown instant spark generated and accompanied by sound, is a normal phenomenon.
6, each change of specimen or in contact with the high-voltage electrode must be with high pressure put flashlight on the high voltage electrode discharge, discharge time more than 5 seconds.
7, every time before the test, must check the instrument grounding
Software function:
01, software platform: WINDOWS window operating platform, intuitive interface, easy to operate
02, the curve shows: in the experimental process can be dynamic display test curve
03, data export: the test results can be imported into the EXCEL table
04, the experimental report: you can set the name of the report, and the report of the experiment to print
05, test methods: according to the needs of the DC test and AC test for flexible selection
06, test methods: according to the demand to choose their own breakdown voltage, voltage test, gradient test
07, parameter setting: according to different test methods and test methods can be flexibly set the different parameters
08, sample setting: can be different standards of the sample parameters of flexible settings
09, personnel management: set the user name and password, different operators to log in for different tests, do not affect each other
10, the standard choice: contains different standards, according to the needs of their own choice
11, continuous operation: continuous operation of the test, can be directly in the software to end the test, the two test
Technical requirements:
01, input voltage: AC 220 V
02, output voltage: AC KV 0--50
DC 0 - 50 KV
03, electrical capacity: 3KVA
04, the breakdown of the maximum output current: 30mA 100mA (can be exchanged)
05, high pressure classification: 0--5KV; 0-10KV; 0-30KV; 0-40KV; 0-50KV, 0-50KV;
06, boost speed: 100V/S 200V/S 500V/S 10V/S 1000V/S 2500V/S 3000V/S
07, test methods:
DC test: 1, breakdown test 2, gradient boost 3, pressure test
AC test: 1, breakdown test 2, gradient boost 3, pressure test
08, breakdown and sentenced to stop: 1, voltage sentenced to stop 2, the current sentenced to stop
09, voltage test accuracy: less than 1%
10, test: 1, 2, insulation insulation test specimen immersed in test samples in air
11, specifications: 25mm brass electrode of a 75mm of two
12, the host size: length and width of about 700*800*1500 (MM)
14, protective cover material: organic glass
15, equipment weight: about 120KG
Main configuration:
1, a test host
50 thousand, 2 volts high voltage generator
3, fully automatic microcomputer voltage regulator device (serial mode)
4, test electrode specifications (Zi Tong)
5, test oil box one: material for organic glass
6, a set of electromagnetic automatic discharge device.
7, voltage breakdown computer control software set
8, a computer set (special anti interference computer)
9, color inkjet printer (HP brand)
10, the national level measurement and identification of a quality certificate
11, a copy of the instructions of the product
12, a certificate of qualification
Product features
1, running in the XP/WIN7/WIN8 WIN system under the independent installation software, friendly interface, easy to operate
2, the experiment shows the curve, the data automatic storage, automatic search
3, a variety of uses can be carried out, DC test test is accurate, reliable and safe
4, computer control test process, automatic judgment stop, automatic reset
5, over voltage, over current, short circuit, leakage, wrong operation and other protection
Operation steps:
1, preparation before the test:
1) the total power switch on the right side of the test machine, preheat for 15 minutes.
2) open the computer to enter the Windows system. Double click the shortcut icon of the instrument software to open the test login screen enter the login password to enter the test interface.
2, AC and DC test switch
1) the high voltage output of the instrument for AC voltage. The method of obtaining direct current is in series with a high voltage silicon stack in the original circuit, which causes the test loop to have a pulsating DC voltage. Implementation of the process, silicon stack has been in a high-voltage transformer high-voltage insulating column, usually with a short rod high-voltage silicon stack is shorted. When the DC test is needed, the short circuit rod is taken out, and the high-voltage silicon stack is connected with the test circuit.
2) front panel DC AC selection button. The state of the button can not change the nature of the output of the device. Press the press