BEST-121体积电阻率表面电阻测试仪

                   体积电阻率表面电阻测试仪符合标准：
Meet the standards:
GB/T 1410-2006《 塑料薄膜电阻率测定仪固体绝缘材料体积电阻率和表面电阻率试验方法》
1410-2006 GB/T "test method for bulk resistivity and surface resistivity of solid insulating materials for plastic film electrical resistivity measuring instruments"
ASTM D257-99 《绝缘材料的直流电阻或电导试验方法》
Test method for DC resistance or conductance of insulating materials by D257-99 ASTM
GB/T 2439-2001《硫化橡胶或热塑性橡胶导电性能和耗散性能电阻率的测定》
2439-2001 GB/T - Determination of electrical conductivity and dissipative properties of vulcanized rubber or thermoplastic rubber
GB/T 10581-2006《绝缘材料在高温下电阻和电阻率的试验方法》
Test method for resistance and resistivity of insulating materials at high temperature by 10581-2006 GB/T
GB/T 1692-2008《硫化橡胶绝缘电阻率的测定》
1692-2008 GB/T "determination of electrical resistivity of vulcanized rubber"
GB/T 12703.4-2010《纺织品 静电性能的评定 第４部分：电阻率》
12703.4-2010 GB/T "the fourth part of the evaluation of the electrostatic properties of textiles: electrical resistivity"
GB/T 10064-2006《测定固体绝缘材料绝缘电阻的试验方法》
10064-2006 GB/T "test method for the determination of the insulation resistance of solid insulating materials"

                   体积电阻率表面电阻测试仪概述
First, an overview
塑料薄膜电阻率测定仪既可测量高电阻，又可测微电流。采用了美国In公司的大规模集成电路,使仪器体积小、重量轻、准确度高。以双3.1/2 位数字直接显示电阻的高阻计和电流。量限从1×104Ω～1×1018 Ω，是目前国内测量范围zui宽，准确度zui高的数字超高阻测量仪。电流测量范围为2×10-4 ～1×10-16Ａ。机内测试电压为100/250/500/1000V任意可调。本仪器具有精度高、显示迅速、性好稳定、读数方便，适用于防静电产品如防静电鞋、防静电塑料橡胶制品、计算机房防静电活动地板等电阻值的检验以及绝缘材料和电子电器产品的绝缘电阻测量。本仪器除能测电阻外，还能直接测量微弱电流。
Plastic film resistivity tester can measure high resistance, and measuring current. Large scale integrated circuit of In company is adopted, which makes the instrument small size, light weight and high accuracy. High resistance meter and current with dual 3.1/2 bit digital direct display resistance. The measurement range is from 1 * 104 to 1 * 1018, which is the most wide measurement range and the highest accuracy. The current measurement range is 2 * 10-4 ~ 1 * 10-16A. The test voltage of the machine is adjustable for 100/250/500/1000V. The instrument has the advantages of high precision, display quickly, good stability, easy reading for inspection to the anti electrostatic products such as anti-static shoes, anti electrostatic plastic and rubber products, computer room anti static floor resistance value and insulating materials electrical and electronic products insulation resistance measurement. In addition to the measurement of resistance of the instrument, but also can directly measure the weak current.

                   体积电阻率表面电阻测试仪主要特点
Two, the main features
电阻测量范围宽 1×104Ω～1×1018Ω
Resistance measurement range x 104 x 1 x 1018 x 1
电流测量范围为 2×10-4Ａ～1×10-16Ａ
The current measurement range is 2 * 10-4A ~ 1 * 10-16A
体积小、重量轻、准确度高
Small size, light weight, high accuracy
电阻、电流双显示
Dual display of resistance and current
性能好稳定、读数方便
Good performance and stable, easy to read
所有测试电压(100/250/500/1000V) 测试时电阻结果直读，免去老式高阻计在不同测试电压下或不同量程时要乘以系数等使用不便的麻烦，使测量超高电阻就如用万用表测量普通电阻样简便。既能测超高电阻又能测微电流
All the test voltage (100/250/500/1000V) to test the resistance results in reading, replacing the old high resistance meter in different test voltage or different scale to multiplied by the coefficient of use inconvenience trouble, enable the measurement of ultra high resistance as the multimeter is used to measure the general resistance of samples is simple. Not only can measure high resistance and micro current

                   体积电阻率表面电阻测试仪技术指标
Three, technical indicators
序号 项目 参数
Item parameters
1 电阻测量范围 0.01×104Ω～1×1018Ω
1 resistance measurement range 0.01 * 104 ~ 1 * 1018
2 电流测量范围为 2×10-4A～1×10-16A
2 current measurement range is 2 * 10-4A ~ 1 * 10-16A
3 双表头显示 3.1/2位LED显示
3 double headers 3.1/2 LED display
4 内置测试电压 100V、250V、500V、1000V
4 built in test voltage 100V, 250V, 500V, 1000V
5 基本准确度 1% (*注)
5 basic accuracy 1% (* Note)
6 内置测试电压 100V、250、500、1000V
6 built in test voltage 100V, 250, 500, 1000V
7 使用环境 温度：0℃～40℃相对湿度<80%
7 using ambient temperature: 0 degrees Celsius to 40 degrees Celsius relative humidity <80%
8 供电形式 AC 220V，50HZ，功耗约5W
8 power supply form 220V 50HZ, AC, power consumption is about 5W
9 仪器尺寸 285ｍｍ× 245ｍｍ× 120 mm
9 instrument size 285mm * 245mm * 120 mm
10 质量 约2.5KG
10 the quality is about 2.5KG

                    体积电阻率表面电阻测试仪工作原理：
Four, working principle
根据欧姆定律，被测电阻Rx等于施加电压V除以通过的电流I。传统的高阻计的工作原理是测量电压V固定，通过测量流过取样电阻的电流I来得到电阻值。从欧姆定律可以看出，由于电流I是与电阻成反比，而不是成正比，所以电阻的显示值是非线性的，即电阻无穷大时，电流为零，即表头的零位处是∞，其附近的刻度非常密，分辨率很低。整个刻度是非线性的。又由于测量不同的电阻时，其电压V也会有些变化，所以普通的高阻计是精度差、分辨率低。
According to Ohm's law, the measured resistance Rx is equal to the applied voltage V divided by the current I. The traditional high resistance meter works is the measurement of the voltage V fixed, by measuring the flow through the sampling resistance of the current I to get the resistance value. Can be seen from Ohm's law, due to the current I is inversely proportional to the resistance, and not directly proportional to, so the resistance to the display value is nonlinear, the resistance is infinite, the current is zero, namely header zero is infinity, near the scale is very close, the resolution is too low. The whole scale is nonlinear. And since the measurement of different resistance, the voltage V will be some changes, so the average high resistance meter is poor accuracy, low resolution.
本仪器是同时测出电阻两端的电压V和流过电阻的电流I，通过内部的大规模集成电路完成电压除以电流的计算，然后把所得到的结果经过A/D转换后以数字显示出电阻值，即便是电阻两端的电压V和流过电阻的电流I是同时变化，其显示的电阻值不象普通高阻计那样因被测电压V的变化或电流Ｉ的变化而变，所以，即使测量电压、被测量电阻、电源电压等发生变化对其结果影响不大，其测量精度很高()，从理论上讲其误差可以做到零，而实际误差可以做到千分之几或万分之几。
This instrument is the current flowing through the resistor V and the voltage across the resistor I measured at the same time, the large scale integrated circuit to complete the calculation of the internal voltage divided by the current, and then the results obtained after A/D conversion by the digital display of the resistance value, even if the current voltage V and the flow resistance of the two ends of the I is changed at the same time, the resistance value is not displayed as ordinary high resistance meter as a result of changes in the measured voltage or current change of V and I, so even if the measurement voltage, the measured resistance and power voltage change has little influence on the results, the measuring accuracy is very high (patent), according to the theory of the error can do zero, while the actual error can be done a few thousandths or very few.

                     体积电阻率表面电阻测试仪典型应用
Typical applications
1.硫化橡胶体积、表面电阻率测定
1 measurement of the volume and surface resistivity of vulcanized rubber
2.测量防静电鞋、导电鞋的电阻值
2 measure the resistance value of the anti-static shoes and conductive shoes.
3.测量防静电材料的电阻及电阻率
3 measure the resistance and resistivity of the antistatic material
4.测量计算机房用活动地板的系统电阻值
4 measure the system resistance value of the computer room floor
5.测量绝缘材料电阻(率)
5 measuring the resistance of insulating materials (rate)
6.光电二极管暗电流测量
6 photodiode dark current measurement
7.物理,光学和材料研究
7 physics, optics and materials research
8.高分子材料表面体积电阻率测定
Determination of surface bulk resistivity of 8 polymer materials

                     体积电阻率表面电阻测试仪标准配置：
Standard configuration:
序号 配置 数量 单位
Number unit
1 主机 1 台
1 host 1
2 屏蔽箱 1 台
2 shield box 1
3 电极 1 套
3 electrode 1 sets
4 测试线+电源线 5 条
4 test line + power cord 5
5 说明书+合格证 2 份
5 manual + 2 copies of the certificate
备注：
remarks：
本仪器配不同的测量电极（夹具）可以测量不同材料（固体、粉体或液体）的体积电阻率和表面电阻率或电导率，*符合国家标准GB1410－2006固体电工绝缘材料绝缘电阻、体积电阻系数和表面电阻试验方法，ASTM D257 绝缘材料的直流电阻或电导试验方法等标准要求。
The apparatus with different measuring electrode (fixture) can measurement of different materials (solid, powder or liquid) volume resistivity and surface resistivity or conductivity, in full compliance with national standards GB1410 - 2006 solid electrical insulation materials insulation resistance, volume resistivity and surface resistivity test method, ASTM D257 insulation material of DC resistance or conductance of test method standards requirements.