品牌
经销商厂商性质
上海市所在地
值编码器absolute encoder
面议
倍加福P+F 传感器 KHA6-GTF-EX1 安全栅
面议倍加福P+F 传感器 ML8-8-200-RT/103/138/143
面议倍加福P+F ML8-8-H-140-RT/59/103/115b2m
面议
德国倍加福 传感器 P+F NJ3-18GK-S1N-130
面议德国倍加福 传感器 P+F SBL-8-H-900-IR-SL/32/59/65b/73
面议德国倍加福 传感器 P+F UB300-18GM40-E5-V1-Y242981
面议德国倍加福 传感器 P+F V1-W-20M-PUR-H/S-V1-G
面议
原装*德国编码器 THI58N-1BAK0R6TN-01024倍加福 p+f
面议P+F旋转型 THI58N-1BAK0R6TN-01000 德国倍加福编码器
面议德国倍加福编码器 THI58N-1BAK0R6TN-00600 P+F旋转型
面议原装*德国编码器 THI58N-1BAK0R6TN-00512倍加福 p+f
面议德国倍加福代理商P+F现货隔离K系列导轨式信号转换安全栅KCD2-UT2-EX1
德国倍加福代理商P+F现货隔离K系列导轨式信号转换安全栅KCD2-UT2-EX1
| 网段保护器 | 现场总线安全栅 | 渗漏检测传感器 |
| KLD0-SAA | F.FB0.P**.A**.1.0.***.***.**** | BP-FBPS-1.30.1 |
| R2-SP-IC* | F.FB0.S**.A**.1.0.***.***.**** | ELS-1 |
| RM-SP* | F.FB1.P14.A**.1.*.***.***.**** | KT-MB-DMA |
| R-SP-E12 | F.FB1.S14.A**.1.*.***.***.**** | KT-SRT-FF |
| SPJB-**-AL*.*** | F2D0-FB-Ex4.* | USB-FBPS-1.11.45.NI |
| SPJB-**-CS*.*** | R4D0-FB-IA* | |
| SPJB-**-FB*.*** | RD0-FB-Ex4.* | |
| SPJB-**-PCW.*** | ||
| SPJB-**-SS*.*** |
KCD2-UT2-EX1
德国
| 产品阐述 | ||
|---|---|---|
| Current output 0/4 mA ... 20 mA | ||
| General specifications | ||
|---|---|---|
| Signal type | Analog input | |
| Supply | ||
| Connection | terminals 9+, 10- or power feed module/Power Rail | |
| Rated voltage | 19 ... 30 V DC | |
| Ripple | within the supply tolerance | |
| Power dissipation/power consumption | ≤ 0.98 W / 0.98 W | |
| Input | ||
| Connection | terminals 1, 2, 3, 4 | |
| RTD | type Pt10, Pt50, Pt100, Pt500, Pt1000 (EN 60751: 1995) type Pt10GOST, Pt50GOST, Pt100GOST, Pt500GOST, Pt1000GOST (6651-94) type Cu10, Cu50, Cu100 (P50353-92) type Ni100 (DIN 43760) | |
| Measuring current | approx. 200 µA with RTD | |
| Types of measuring | 2-, 3-, 4-wire connection | |
| Lead resistance | max. 50 Ω per line | |
| Measuring circuit monitoring | sensor breakage, sensor short-circuit | |
| Thermocouples | type B, E, J, K, N, R, S, T (IEC 584-1: 1995) type L (DIN 43710: 1985) type TXK, TXKH, TXA (P8.585-2001) | |
| Cold junction compensation | external and internal | |
| Measuring circuit monitoring | sensor breakage | |
| Potentiometer | 0 ... 20 kΩ (2-wire connection), 0.8 ... 20 kΩ (3-wire connection) | |
| Voltage | selectable within the range -100 ... 100 mV | |
| Input resistance | ≥ 1 MΩ (-100 ... 100 mV) | |
| Output | ||
| Connection | terminal 5: source (-), terminal 6: source (+), terminal 7: sink(-), terminal 8: sink (+) | |
| Output | Analog current output | |
| Current range | 0 ... 20 mA or 4 ... 20 mA | |
| Fault signal | downscale 0 or 2 mA, upscale 21.5 mA (acc. NAMUR NE43) | |
| Source | load 0 ... 550 Ω open-circuit voltage ≤ 18 V | |
| Sink | Voltage across terminals 5 ... 30 V. If the current is supplied from a source > 16.5 V, series resistance of ≥ (V - 16.5)/0.0215 Ω is needed, where V is the source voltage. The maximum value of the resistance is (V - 5)/0.0215 Ω. | |
| Transfer characteristics | ||
| Reaction time | worst case value (sensor breakage and/or sensor short circuit detection enabled) mV: 1 s, thermocouples with CJC: 1.1 s, thermocouples with fixed reference temperature: 1.1 s, 3- or 4-wire RTD: 920 ms, 2-wire RTD: 800 ms, Potentiometer: 2.05 s | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Electromagnetic compatibility | NE 21:2011 | |
| Degree of protection | IEC 60529:2001 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Mass | approx. 100 g | |
| Dimensions | 12.5 x 114 x 124 mm (0.5 x 4.5 x 4.9 inch) , housing type A2 | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| Data for application in connection with hazardous areas | ||
| EC-Type Examination Certificate | BASEEFA 13 ATEX 0102 X | |
| Group, category, type of protection |  II (1)G [Ex ia Ga] IIC , II (1)D [Ex ia Da] IIIC , I (M1) [Ex ia Ma] I | |
| Statement of conformity | BASEEFA 13 ATEX 0103 X | |
| Group, category, type of protection, temperature class | II 3G Ex nA II T4 Gc [device in zone 2] | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 | |
| International approvals | ||
| UL approval | ||
| Control drawing | 116-0379 (cULus) | |
| IECEx approval | IECEx BAS 13.0057X | |
| Approved for | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I | |
倍加福代理商P+F现货隔离K系列导轨式信号转换安全栅KCD2-UT2-EX1
KCD2-UT2-EX1
