技术中心

The boarding bridge is an auxiliary equipment for loading and unloading goods used in conjunction with the forklift. The height can be adjusted according to the height of the car compartment. The forklift can directly drive into the compartment through this equipment for batch loading and unloading of goods. Only one person can work to achieve rapid loading and unloading of goods. It enables enterprises to improve work efficiency, reduce a lot of labor and obtain greater economic benefits.

产品特点

Product features

台面采用特制的菱形网格板有可靠的强度，能保证长期使用而不变形。它的菱形网状结构，充分保证了防滑性能，使叉车有更好的爬坡性和可操纵性。即使在雨、雪天气，仍能保证正常使用。可调节长度的索链能方便地钩住货车，使移动式登车桥与货车始终紧密贴合。采用手摇液压泵作动力，勿需外接动力电源即可轻松实现登车桥的高度调节。配置的刹车垫可有效防止货车装卸时登车桥移位。

The table top is made of special diamond grid plate with reliable strength, which can ensure long-term use without deformation. Its rhombic mesh structure fully ensures the anti-skid performance, and makes the forklift have better climbing ability and maneuverability. Even in rainy and snowy weather, it can still ensure normal use. The cable chain with adjustable length can easily hook the truck, so that the boarding bridge and the truck always fit closely. The manual hydraulic pump is used as the power, and the height adjustment of the boarding bridge can be easily realized without external power supply. The equipped brake pad can effectively prevent the shift of the boarding bridge during loading and unloading of the truck.

产品结构

product mix

采用特制异型钢管，台面采用特制的菱形网格板，防滑(网)板。它的波形钢格网状结构，充分保证了防线。产品性能，使叉车有更好的爬坡性和可操纵性。配置的刹车垫（可有效防止货车装卸时液压登车桥移位）。可调节长度的索链能方便地钩住货车，使登车桥与货车始终紧密贴合。

Special shaped steel pipes are used, and the table top is made of special diamond grid plate and anti-slip (mesh) plate. Its corrugated steel lattice network structure fully guarantees the line of defense. The product performance makes the forklift have better climbing ability and maneuverability. Equipped brake pad (which can effectively prevent the displacement of hydraulic boarding bridge during truck loading and unloading). The cable chain with adjustable length can easily hook the truck, so that the boarding bridge and the truck always fit closely.

了解移动式登车桥的结构和组成部件，有助于我们更好的使用和维护登车桥，发挥它的作用。给您介绍移动式登车桥的结构。部位1为尾板，尾板是一个高度较低的小型斜坡，工作时，尾板落下，便于叉车驶上登车桥。登车桥工作台斜坡部位，斜坡底部为移动式登车桥的承重底架，斜坡台面有高强度防滑花纹板和高强度钢格板两层台面组成，高强度钢格板能增加叉车的摩擦力，便于爬坡，斜坡的角度可以通过液压操作杆调整，为了便于叉车上下，斜坡角度不宜过大。油缸，是调整登车桥高度（斜坡角度）的直接执行机构。

Understanding the structure and components of the boarding bridge will help us better use and maintain the boarding bridge and play its role. The structure of the boarding bridge is introduced to you. Part 1 is the tailboard. The tailboard is a small slope with a low height. When working, the tailboard falls down to facilitate the forklift to drive onto the boarding bridge. At the slope of the working platform of the boarding bridge, the bottom of the slope is the load-bearing underframe of the boarding bridge. The slope table is composed of two layers of high strength anti-skid pattern plate and high strength steel grating. The high strength steel grating can increase the friction of the forklift and facilitate climbing. The angle of the slope can be adjusted by the hydraulic operating rod. In order to facilitate the forklift up and down, the slope angle should not be too large. The oil cylinder is the direct actuator for adjusting the height (slope angle) of the boarding axle.

移动式登车桥的轮胎和车轴，它便于移动式登车桥移动转移。手动液压系统，它包括手动操作杆、手动液压泵和油箱，通过操作操作杆，在手压泵的作用下，把油箱里的油压入油缸，从而驱动登车桥上升，下降时，打开回油阀，登车桥在自身重力作用下自然下降。为安全护栏，它能有效的防止叉车意外从登车桥上跌落。部位7为手摇支撑腿，根据作业车辆车厢高度调整好登车桥高度后，通过手摇支撑腿摇柄把支撑腿高度降到地面后锁定。支撑腿能承载叉车和货物大部分的重力，有效地减施加在作业车辆车厢上的压力。

The tires and axles of the boarding bridge are convenient for the boarding bridge to move and transfer. The manual hydraulic system includes the manual operating lever, the manual hydraulic pump and the oil tank. Through the operating lever, under the action of the manual pump, the oil pressure in the oil tank is put into the oil tank, so as to drive the boarding bridge to rise. When lowering, open the oil return valve, and the boarding bridge will fall under its own gravity. As a safety barrier, it can effectively prevent the forklift from accidentally falling off the boarding bridge. Part 7 is the hand-shaking support leg. After the height of the boarding bridge is adjusted according to the height of the operating vehicle carriage, the height of the support leg is lowered to the ground through the hand-shaking support leg crank and then locked. The support leg can bear most of the gravity of the forklift and cargo, effectively reducing the pressure exerted on the working vehicle compartment.

以上的精彩内容均来自：升降机厂家更多的精彩内容请点击进入我们的网站：进行交流学习，我们后续会不断的为您提供分享，敬请期待！

The above highlights are from: For more highlights from lift manufacturers, please click to enter our website: We will continue to share with you in the future!