环氧树脂介电常数测试仪,介电常数测试仪满足标准：GBT 1409-2006测量电气绝缘材料在工频、音频、高频（包括米波波长在内）下电容率和介质损耗因数的推荐方法

介质损耗和介电常数是各种电瓷、装置瓷、电容器等陶瓷，还有复合材料等的一项重要的物理性质，通过测定介质损耗角正切tanδ及介电常数（ε），可进一步了解影响介质损耗和介电常数的各种因素，为提高材料的性能提供依据；

仪器的基本原理是采用高频谐振法，并提供了，通用、多用途、多量程的阻抗测试。

环氧树脂介电常数测试仪,介电常数测试仪以单片计算机作为仪器的控制，测量核心采用了频率数字锁定，标准频率测试点自动设定，谐振点自动搜索，Q值量程自动转换，数值显示等新技术，改进了调谐回路，使得调谐测试回路的残余电感减至zui低，并保留了原Q表中自动稳幅等技术，使得新仪器在使用时更为方便，测量值更为精确。

仪器能在较高的测试频率条件下，测量高频电感或谐振回路的Q值，电感器的电感量和分布电容量，电容器的电容量和损耗角正切值，电工材料的高频介质损耗，高频回路有效并联及串联电阻，传输线的特性阻抗等。 

技术指标

  1．Q值测量

   a．Q值测量范围：2～1023。

   b．Q值量程分档：30、100、300、1000、自动换档或手动换档。

 c．标称误差

电极分开调节

圆筒电极与平板电极 分开测量不能用一体电极 精度较差！

环氧树脂介电常数测试仪特点：

量程高，精度好！

无需换算

彩色触摸屏系统可设置 无需切换

Epoxy resin dielectric constant tester meet standard: GBT 1409-2006 to measure the electrical insulation in power frequency, audio frequency, high frequency (including m wavelength) the recommended method of the dielectric constant and dielectric loss factor
 
 
 
Dielectric loss and dielectric constant are various electrical porcelain, porcelain, capacitor, such as ceramic, and composite materials such as one of the important physical properties, by measuring dielectric loss Angle tangent tan delta and dielectric constant (epsilon), to further understand the various factors influencing the dielectric loss and dielectric constant, and provide the basis for improve the performance of materials;
 
The basic principle of the instrument is to adopt the high frequency resonance method and provide the general, multi-purpose, multi-range impedance test.
 
Epoxy resin dielectric constant test instrument with single chip computer as control instrument, frequency measuring core with the digital lock, standard frequency test point set automatically, automatic resonance point search, Q value range automatic conversion, numerical display new technology, such as improved tuning loop, the tuning test circuit minimizes the residual inductance, and keep the original Q table automatic painting techniques, makes the new instrument when use more convenient, more accurate measurements.
 
 
 
Instrument can under the condition of high test frequency, measuring the high frequency inductive or Q value of resonance loop, inductance and distributed capacitance of inductance and capacitance of capacitor and loss tangent value, electrical material of dielectric loss at high frequency, high frequency circuit effectively in parallel and series resistance, the characteristic impedance of a transmission line, etc.
 
 
 
 
 
Technical index of epoxy resin dielectric constant tester
 
1. Q value measurement
 
 
 
A. Q range: 2 ~ 1023.
 
B. Q value range: 30, 100, 300, 1000, automatic shift or manual shift.
 
C. Nominal error
 
project
GDAT - A
 
Frequency range
10 KHZ ~ 10 MHZ;
 
Inherent error
2% of 5% plus or minus full value;
 
Operating errors
2% of the value of 7% plus or minus;
 
Frequency range
10 MHZ to 160 MHZ;
 
Inherent error
2% of the value of 6% plus or minus.
 
Operating errors
2 percent of the value of 8% plus or minus.
 
 
 
 
 
 
 
Electrode separation adjustment
 
The measurement of the cylinder electrode and the flat electrode can not be measured with one electrode.
 
 
 
 
 
Characteristics of epoxy resin dielectric constant tester:
 
The range is high, the accuracy is good!
 
No conversion
 
Color touch screen system can be set without switching