品牌
生产厂家厂商性质
北京市所在地
产品名称：熔融指数试验机，熔体流动速率测定仪
型号： BRR
一、满足标准：
ISO 1133,ASTM D1238,GB/T3682
二、产品说明：
此款熔融指数试验机为改良款，增加了众多功能，在仪器配置、仪器使用寿命、操作便利性、测试精度方面有大幅提高，
具有国内一般熔融指数试验机所*的优势和性价比。
三、产品特点：
1、升温速度快，超调量极小 2、恒温精度高
3、在填料之后，能迅速恢复恒温状态 4、试验参数校准并修正方便
5、可采用手动、自动切料试验方法 6、中文液晶显示
7、配有打印机，将测试结果自动打印输出
四、主要技术参数
1、挤压出料部分
出料口直径：Φ2.095±0.005毫米，出料口长度：8.000±0.025毫米
装料筒直径：Φ9.550±0.025毫米，装料筒长度：152± 0.1毫米
活塞杆头直径：9.475±0.015毫米，活塞杆头长度：6.350±0.100毫米
2、标准试验负荷（共8级全304#不锈钢砝码）
3、温度范围：常规室温——400℃（500℃可选）
4、恒温精度：±0.5℃ 5、显示分辨率：0.1℃
6、切料方式：可选手动或自动切料7、温度恢复时间：小于4分钟
8、打印：微型打印机自动打印输出 9、电源电压：AC220V±10% 50HZ
五、配件
序 号 名 称 单 位 数 量 备注
1、 砝码 套 1 计8件（1#在1级负荷内）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
2、 砝码托盘 件 1 在1级负荷内
3、 装料斗 件 1 4、 口模清理棒 件 1
5、 装料杆 件 1 6、 料筒清理杆 件 1 组合件
7、 活塞杆 件 1 （在1级负荷内）
8、 口模 件 1 9、 水准仪 件 1
10、纱布 卷 2 11、 打印纸 卷 2
六、仪器特点：
1、全套砝码采用304不锈钢材料制作，防止生锈影响外观及砝码精度
2、加热筒采用304不锈钢制作，因熔融指数试验机长期在高温下工作（zui高可达400~500度），高温下金属材料极易氧化生锈
3、双传感器配置，控温精确，温度梯度更好，寿命更长
4、按国标要求，加料后增加四分钟倒计时功能
5、RS232接口，可直接连接电脑输出数据（选配）
6、开机后可直接显示上次测试条件，避免每次用户都重新设置试验参数，减少操作人员工作量
7、zui高温度可达450~500度（订货时需特殊说明）
8、可长时间测试强腐蚀性塑料而无损仪器精度、
Product Name: melt index tester, melt flow rate tester
型号： BRR
Model: BRR
一、满足标准：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、产品说明：
Two, product description:
此款熔融指数试验机为改良款，增加了众多功能，在仪器配置、仪器使用寿命、操作便利性、测试精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有国内一般熔融指数试验机所*的优势和性价比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、产品特点：
Three, product characteristics:
1、升温速度快，超调量极小 2、恒温精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢复恒温状态 4、试验参数校准并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手动、自动切料试验方法 6、中文液晶显示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印机，将测试结果自动打印输出
7, equipped with a printer, the results of the test automatically print output
四、主要技术参数
Four, the main technical parameters
1、挤压出料部分
1, extruding and discharging part
出料口直径：Φ2.095±0.005毫米，出料口长度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
装料筒直径：Φ9.550±0.025毫米，装料筒长度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞杆头直径：9.475±0.015毫米，活塞杆头长度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、标准试验负荷（共8级全304#不锈钢砝码）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、温度范围：常规室温——400℃（500℃可选）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒温精度：±0.5℃ 5、显示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可选手动或自动切料7、温度恢复时间：小于4分钟
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印机自动打印输出 9、电源电压：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 号 名 称 单 位 数 量 备注
The sequence number name a number of notes
1、 砝码 套 1 计8件（1#在1级负荷内）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝码托盘 件 1 在1级负荷内
2, weight tray 1 at 1 load
3、 装料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 装料杆 件 1 6、 料筒清理杆 件 1 组合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞杆 件 1 （在1级负荷内）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水准仪 件 1
8, die 19, level 1
10、纱布 卷 2 11、 打印纸 卷 2
10, gauze volume 211, Volume 2 printing paper
六、仪器特点：
Six, characteristics of the instrument:
1、全套砝码采用304不锈钢材料制作，防止生锈影响外观及砝码精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加热筒采用304不锈钢制作，因熔融指数试验机长期在高温下工作（zui高可达400~500度），高温下金属材料极易氧化生锈
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、双传感器配置，控温精确，温度梯度更好，寿命更长
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按国标要求，加料后增加四分钟倒计时功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接连接电脑输出数据（选配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、开机后可直接显示上次测试条件，避免每次用户都重新设置试验参数，减少操作人员工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高温度可达450~500度（订货时需特殊说明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可长时间测试强腐蚀性塑料而无损仪器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型号： BRR
Model: BRR
一、满足标准：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、产品说明：
Two, product description:
此款熔融指数试验机为改良款，增加了众多功能，在仪器配置、仪器使用寿命、操作便利性、测试精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有国内一般熔融指数试验机所*的优势和性价比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、产品特点：
Three, product characteristics:
1、升温速度快，超调量极小 2、恒温精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢复恒温状态 4、试验参数校准并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手动、自动切料试验方法 6、中文液晶显示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印机，将测试结果自动打印输出
7, equipped with a printer, the results of the test automatically print output
四、主要技术参数
Four, the main technical parameters
1、挤压出料部分
1, extruding and discharging part
出料口直径：Φ2.095±0.005毫米，出料口长度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
装料筒直径：Φ9.550±0.025毫米，装料筒长度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞杆头直径：9.475±0.015毫米，活塞杆头长度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、标准试验负荷（共8级全304#不锈钢砝码）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、温度范围：常规室温——400℃（500℃可选）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒温精度：±0.5℃ 5、显示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可选手动或自动切料7、温度恢复时间：小于4分钟
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印机自动打印输出 9、电源电压：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 号 名 称 单 位 数 量 备注
The sequence number name a number of notes
1、 砝码 套 1 计8件（1#在1级负荷内）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝码托盘 件 1 在1级负荷内
2, weight tray 1 at 1 load
3、 装料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 装料杆 件 1 6、 料筒清理杆 件 1 组合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞杆 件 1 （在1级负荷内）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水准仪 件 1
8, die 19, level 1
10、纱布 卷 2 11、 打印纸 卷 2
10, gauze volume 211, Volume 2 printing paper
六、仪器特点：
Six, characteristics of the instrument:
1、全套砝码采用304不锈钢材料制作，防止生锈影响外观及砝码精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加热筒采用304不锈钢制作，因熔融指数试验机长期在高温下工作（zui高可达400~500度），高温下金属材料极易氧化生锈
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、双传感器配置，控温精确，温度梯度更好，寿命更长
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按国标要求，加料后增加四分钟倒计时功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接连接电脑输出数据（选配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、开机后可直接显示上次测试条件，避免每次用户都重新设置试验参数，减少操作人员工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高温度可达450~500度（订货时需特殊说明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可长时间测试强腐蚀性塑料而无损仪器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型号： BRR
Model: BRR
一、满足标准：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、产品说明：
Two, product description:
此款熔融指数试验机为改良款，增加了众多功能，在仪器配置、仪器使用寿命、操作便利性、测试精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有国内一般熔融指数试验机所*的优势和性价比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、产品特点：
Three, product characteristics:
1、升温速度快，超调量极小 2、恒温精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢复恒温状态 4、试验参数校准并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手动、自动切料试验方法 6、中文液晶显示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印机，将测试结果自动打印输出
7, equipped with a printer, the results of the test automatically print output
四、主要技术参数
Four, the main technical parameters
1、挤压出料部分
1, extruding and discharging part
出料口直径：Φ2.095±0.005毫米，出料口长度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
装料筒直径：Φ9.550±0.025毫米，装料筒长度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞杆头直径：9.475±0.015毫米，活塞杆头长度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、标准试验负荷（共8级全304#不锈钢砝码）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、温度范围：常规室温——400℃（500℃可选）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒温精度：±0.5℃ 5、显示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可选手动或自动切料7、温度恢复时间：小于4分钟
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印机自动打印输出 9、电源电压：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 号 名 称 单 位 数 量 备注
The sequence number name a number of notes
1、 砝码 套 1 计8件（1#在1级负荷内）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝码托盘 件 1 在1级负荷内
2, weight tray 1 at 1 load
3、 装料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 装料杆 件 1 6、 料筒清理杆 件 1 组合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞杆 件 1 （在1级负荷内）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水准仪 件 1
8, die 19, level 1
10、纱布 卷 2 11、 打印纸 卷 2
10, gauze volume 211, Volume 2 printing paper
六、仪器特点：
Six, characteristics of the instrument:
1、全套砝码采用304不锈钢材料制作，防止生锈影响外观及砝码精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加热筒采用304不锈钢制作，因熔融指数试验机长期在高温下工作（zui高可达400~500度），高温下金属材料极易氧化生锈
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、双传感器配置，控温精确，温度梯度更好，寿命更长
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按国标要求，加料后增加四分钟倒计时功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接连接电脑输出数据（选配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、开机后可直接显示上次测试条件，避免每次用户都重新设置试验参数，减少操作人员工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高温度可达450~500度（订货时需特殊说明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可长时间测试强腐蚀性塑料而无损仪器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型号： BRR
Model: BRR
一、满足标准：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、产品说明：
Two, product description:
此款熔融指数试验机为改良款，增加了众多功能，在仪器配置、仪器使用寿命、操作便利性、测试精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有国内一般熔融指数试验机所*的优势和性价比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、产品特点：
Three, product characteristics:
1、升温速度快，超调量极小 2、恒温精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢复恒温状态 4、试验参数校准并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手动、自动切料试验方法 6、中文液晶显示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印机，将测试结果自动打印输出
7, equipped with a printer, the results of the test automatically print output
四、主要技术参数
Four, the main technical parameters
1、挤压出料部分
1, extruding and discharging part
出料口直径：Φ2.095±0.005毫米，出料口长度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
装料筒直径：Φ9.550±0.025毫米，装料筒长度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞杆头直径：9.475±0.015毫米，活塞杆头长度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、标准试验负荷（共8级全304#不锈钢砝码）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、温度范围：常规室温——400℃（500℃可选）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒温精度：±0.5℃ 5、显示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可选手动或自动切料7、温度恢复时间：小于4分钟
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印机自动打印输出 9、电源电压：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 号 名 称 单 位 数 量 备注
The sequence number name a number of notes
1、 砝码 套 1 计8件（1#在1级负荷内）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝码托盘 件 1 在1级负荷内
2, weight tray 1 at 1 load
3、 装料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 装料杆 件 1 6、 料筒清理杆 件 1 组合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞杆 件 1 （在1级负荷内）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水准仪 件 1
8, die 19, level 1
10、纱布 卷 2 11、 打印纸 卷 2
10, gauze volume 211, Volume 2 printing paper
六、仪器特点：
Six, characteristics of the instrument:
1、全套砝码采用304不锈钢材料制作，防止生锈影响外观及砝码精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加热筒采用304不锈钢制作，因熔融指数试验机长期在高温下工作（zui高可达400~500度），高温下金属材料极易氧化生锈
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、双传感器配置，控温精确，温度梯度更好，寿命更长
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按国标要求，加料后增加四分钟倒计时功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接连接电脑输出数据（选配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、开机后可直接显示上次测试条件，避免每次用户都重新设置试验参数，减少操作人员工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高温度可达450~500度（订货时需特殊说明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可长时间测试强腐蚀性塑料而无损仪器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型号： BRR
Model: BRR
一、满足标准：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、产品说明：
Two, product description:
此款熔融指数试验机为改良款，增加了众多功能，在仪器配置、仪器使用寿命、操作便利性、测试精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有国内一般熔融指数试验机所*的优势和性价比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、产品特点：
Three, product characteristics:
1、升温速度快，超调量极小 2、恒温精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢复恒温状态 4、试验参数校准并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手动、自动切料试验方法 6、中文液晶显示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印机，将测试结果自动打印输出
7, equipped with a printer, the results of the test automatically print output
四、主要技术参数
Four, the main technical parameters
1、挤压出料部分
1, extruding and discharging part
出料口直径：Φ2.095±0.005毫米，出料口长度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
装料筒直径：Φ9.550±0.025毫米，装料筒长度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞杆头直径：9.475±0.015毫米，活塞杆头长度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、标准试验负荷（共8级全304#不锈钢砝码）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、温度范围：常规室温——400℃（500℃可选）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒温精度：±0.5℃ 5、显示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可选手动或自动切料7、温度恢复时间：小于4分钟
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印机自动打印输出 9、电源电压：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 号 名 称 单 位 数 量 备注
The sequence number name a number of notes
1、 砝码 套 1 计8件（1#在1级负荷内）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝码托盘 件 1 在1级负荷内
2, weight tray 1 at 1 load
3、 装料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 装料杆 件 1 6、 料筒清理杆 件 1 组合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞杆 件 1 （在1级负荷内）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水准仪 件 1
8, die 19, level 1
10、纱布 卷 2 11、 打印纸 卷 2
10, gauze volume 211, Volume 2 printing paper
六、仪器特点：
Six, characteristics of the instrument:
1、全套砝码采用304不锈钢材料制作，防止生锈影响外观及砝码精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加热筒采用304不锈钢制作，因熔融指数试验机长期在高温下工作（zui高可达400~500度），高温下金属材料极易氧化生锈
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、双传感器配置，控温精确，温度梯度更好，寿命更长
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按国标要求，加料后增加四分钟倒计时功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接连接电脑输出数据（选配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、开机后可直接显示上次测试条件，避免每次用户都重新设置试验参数，减少操作人员工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高温度可达450~500度（订货时需特殊说明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可长时间测试强腐蚀性塑料而无损仪器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型号： BRR
Model: BRR
一、满足标准：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、产品说明：
Two, product description:
此款熔融指数试验机为改良款，增加了众多功能，在仪器配置、仪器使用寿命、操作便利性、测试精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有国内一般熔融指数试验机所*的优势和性价比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、产品特点：
Three, product characteristics:
1、升温速度快，超调量极小 2、恒温精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢复恒温状态 4、试验参数校准并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手动、自动切料试验方法 6、中文液晶显示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印机，将测试结果自动打印输出
7, equipped with a printer, the results of the test automatically print output
四、主要技术参数
Four, the main technical parameters
1、挤压出料部分
1, extruding and discharging part
出料口直径：Φ2.095±0.005毫米，出料口长度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
装料筒直径：Φ9.550±0.025毫米，装料筒长度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞杆头直径：9.475±0.015毫米，活塞杆头长度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、标准试验负荷（共8级全304#不锈钢砝码）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、温度范围：常规室温——400℃（500℃可选）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒温精度：±0.5℃ 5、显示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可选手动或自动切料7、温度恢复时间：小于4分钟
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印机自动打印输出 9、电源电压：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 号 名 称 单 位 数 量 备注
The sequence number name a number of notes
1、 砝码 套 1 计8件（1#在1级负荷内）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝码托盘 件 1 在1级负荷内
2, weight tray 1 at 1 load
3、 装料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 装料杆 件 1 6、 料筒清理杆 件 1 组合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞杆 件 1 （在1级负荷内）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水准仪 件 1
8, die 19, level 1
10、纱布 卷 2 11、 打印纸 卷 2
10, gauze volume 211, Volume 2 printing paper
六、仪器特点：
Six, characteristics of the instrument:
1、全套砝码采用304不锈钢材料制作，防止生锈影响外观及砝码精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加热筒采用304不锈钢制作，因熔融指数试验机长期在高温下工作（zui高可达400~500度），高温下金属材料极易氧化生锈
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、双传感器配置，控温精确，温度梯度更好，寿命更长
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按国标要求，加料后增加四分钟倒计时功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接连接电脑输出数据（选配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、开机后可直接显示上次测试条件，避免每次用户都重新设置试验参数，减少操作人员工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高温度可达450~500度（订货时需特殊说明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可长时间测试强腐蚀性塑料而无损仪器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型号： BRR
Model: BRR
一、满足标准：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、产品说明：
Two, product description:
此款熔融指数试验机为改良款，增加了众多功能，在仪器配置、仪器使用寿命、操作便利性、测试精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有国内一般熔融指数试验机所*的优势和性价比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、产品特点：
Three, product characteristics:
1、升温速度快，超调量极小 2、恒温精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢复恒温状态 4、试验参数校准并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手动、自动切料试验方法 6、中文液晶显示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印机，将测试结果自动打印输出
7, equipped with a printer, the results of the test automatically print output
四、主要技术参数
Four, the main technical parameters
1、挤压出料部分
1, extruding and discharging part
出料口直径：Φ2.095±0.005毫米，出料口长度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
装料筒直径：Φ9.550±0.025毫米，装料筒长度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞杆头直径：9.475±0.015毫米，活塞杆头长度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、标准试验负荷（共8级全304#不锈钢砝码）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、温度范围：常规室温——400℃（500℃可选）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒温精度：±0.5℃ 5、显示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可选手动或自动切料7、温度恢复时间：小于4分钟
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印机自动打印输出 9、电源电压：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 号 名 称 单 位 数 量 备注
The sequence number name a number of notes
1、 砝码 套 1 计8件（1#在1级负荷内）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝码托盘 件 1 在1级负荷内
2, weight tray 1 at 1 load
3、 装料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 装料杆 件 1 6、 料筒清理杆 件 1 组合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞杆 件 1 （在1级负荷内）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水准仪 件 1
8, die 19, level 1
10、纱布 卷 2 11、 打印纸 卷 2
10, gauze volume 211, Volume 2 printing paper
六、仪器特点：
Six, characteristics of the instrument:
1、全套砝码采用304不锈钢材料制作，防止生锈影响外观及砝码精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加热筒采用304不锈钢制作，因熔融指数试验机长期在高温下工作（zui高可达400~500度），高温下金属材料极易氧化生锈
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、双传感器配置，控温精确，温度梯度更好，寿命更长
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按国标要求，加料后增加四分钟倒计时功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接连接电脑输出数据（选配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、开机后可直接显示上次测试条件，避免每次用户都重新设置试验参数，减少操作人员工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高温度可达450~500度（订货时需特殊说明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可长时间测试强腐蚀性塑料而无损仪器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型号： BRR
Model: BRR
一、满足标准：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、产品说明：
Two, product description:
此款熔融指数试验机为改良款，增加了众多功能，在仪器配置、仪器使用寿命、操作便利性、测试精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有国内一般熔融指数试验机所*的优势和性价比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、产品特点：
Three, product characteristics:
1、升温速度快，超调量极小 2、恒温精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢复恒温状态 4、试验参数校准并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手动、自动切料试验方法 6、中文液晶显示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印机，将测试结果自动打印输出
7, equipped with a printer, the results of the test automatically print output
四、主要技术参数
Four, the main technical parameters
1、挤压出料部分
1, extruding and discharging part
出料口直径：Φ2.095±0.005毫米，出料口长度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
装料筒直径：Φ9.550±0.025毫米，装料筒长度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞杆头直径：9.475±0.015毫米，活塞杆头长度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、标准试验负荷（共8级全304#不锈钢砝码）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、温度范围：常规室温——400℃（500℃可选）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒温精度：±0.5℃ 5、显示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可选手动或自动切料7、温度恢复时间：小于4分钟
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印机自动打印输出 9、电源电压：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 号 名 称 单 位 数 量 备注
The sequence number name a number of notes
1、 砝码 套 1 计8件（1#在1级负荷内）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝码托盘 件 1 在1级负荷内
2, weight tray 1 at 1 load
3、 装料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 装料杆 件 1 6、 料筒清理杆 件 1 组合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞杆 件 1 （在1级负荷内）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水准仪 件 1
8, die 19, level 1
10、纱布 卷 2 11、 打印纸 卷 2
10, gauze volume 211, Volume 2 printing paper
六、仪器特点：
Six, characteristics of the instrument:
1、全套砝码采用304不锈钢材料制作，防止生锈影响外观及砝码精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加热筒采用304不锈钢制作，因熔融指数试验机长期在高温下工作（zui高可达400~500度），高温下金属材料极易氧化生锈
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、双传感器配置，控温精确，温度梯度更好，寿命更长
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按国标要求，加料后增加四分钟倒计时功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接连接电脑输出数据（选配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、开机后可直接显示上次测试条件，避免每次用户都重新设置试验参数，减少操作人员工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高温度可达450~500度（订货时需特殊说明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可长时间测试强腐蚀性塑料而无损仪器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型号： BRR
Model: BRR
一、满足标准：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、产品说明：
Two, product description:
此款熔融指数试验机为改良款，增加了众多功能，在仪器配置、仪器使用寿命、操作便利性、测试精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有国内一般熔融指数试验机所*的优势和性价比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、产品特点：
Three, product characteristics:
1、升温速度快，超调量极小 2、恒温精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢复恒温状态 4、试验参数校准并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手动、自动切料试验方法 6、中文液晶显示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印机，将测试结果自动打印输出
7, equipped with a printer, the results of the test automatically print output
四、主要技术参数
Four, the main technical parameters
1、挤压出料部分
1, extruding and discharging part
出料口直径：Φ2.095±0.005毫米，出料口长度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
装料筒直径：Φ9.550±0.025毫米，装料筒长度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞杆头直径：9.475±0.015毫米，活塞杆头长度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、标准试验负荷（共8级全304#不锈钢砝码）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、温度范围：常规室温——400℃（500℃可选）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒温精度：±0.5℃ 5、显示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可选手动或自动切料7、温度恢复时间：小于4分钟
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印机自动打印输出 9、电源电压：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 号 名 称 单 位 数 量 备注
The sequence number name a number of notes
1、 砝码 套 1 计8件（1#在1级负荷内）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝码托盘 件 1 在1级负荷内
2, weight tray 1 at 1 load
3、 装料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 装料杆 件 1 6、 料筒清理杆 件 1 组合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞杆 件 1 （在1级负荷内）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水准仪 件 1
8, die 19, level 1
10、纱布 卷 2 11、 打印纸 卷 2
10, gauze volume 211, Volume 2 printing paper
六、仪器特点：
Six, characteristics of the instrument:
1、全套砝码采用304不锈钢材料制作，防止生锈影响外观及砝码精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加热筒采用304不锈钢制作，因熔融指数试验机长期在高温下工作（zui高可达400~500度），高温下金属材料极易氧化生锈
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、双传感器配置，控温精确，温度梯度更好，寿命更长
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按国标要求，加料后增加四分钟倒计时功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接连接电脑输出数据（选配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、开机后可直接显示上次测试条件，避免每次用户都重新设置试验参数，减少操作人员工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高温度可达450~500度（订货时需特殊说明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可长时间测试强腐蚀性塑料而无损仪器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型号： BRR
Model: BRR
一、满足标准：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、产品说明：
Two, product description:
此款熔融指数试验机为改良款，增加了众多功能，在仪器配置、仪器使用寿命、操作便利性、测试精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有国内一般熔融指数试验机所*的优势和性价比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、产品特点：
Three, product characteristics:
1、升温速度快，超调量极小 2、恒温精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢复恒温状态 4、试验参数校准并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手动、自动切料试验方法 6、中文液晶显示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印机，将测试结果自动打印输出
7, equipped with a printer, the results of the test automatically print output
四、主要技术参数
Four, the main technical parameters
1、挤压出料部分
1, extruding and discharging part
出料口直径：Φ2.095±0.005毫米，出料口长度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
装料筒直径：Φ9.550±0.025毫米，装料筒长度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞杆头直径：9.475±0.015毫米，活塞杆头长度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、标准试验负荷（共8级全304#不锈钢砝码）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、温度范围：常规室温——400℃（500℃可选）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒温精度：±0.5℃ 5、显示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可选手动或自动切料7、温度恢复时间：小于4分钟
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印机自动打印输出 9、电源电压：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 号 名 称 单 位 数 量 备注
The sequence number name a number of notes
1、 砝码 套 1 计8件（1#在1级负荷内）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝码托盘 件 1 在1级负荷内
2, weight tray 1 at 1 load
3、 装料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 装料杆 件 1 6、 料筒清理杆 件 1 组合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞杆 件 1 （在1级负荷内）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水准仪 件 1
8, die 19, level 1
10、纱布 卷 2 11、 打印纸 卷 2
10, gauze volume 211, Volume 2 printing paper
六、仪器特点：
Six, characteristics of the instrument:
1、全套砝码采用304不锈钢材料制作，防止生锈影响外观及砝码精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加热筒采用304不锈钢制作，因熔融指数试验机长期在高温下工作（zui高可达400~500度），高温下金属材料极易氧化生锈
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、双传感器配置，控温精确，温度梯度更好，寿命更长
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按国标要求，加料后增加四分钟倒计时功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接连接电脑输出数据（选配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、开机后可直接显示上次测试条件，避免每次用户都重新设置试验参数，减少操作人员工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高温度可达450~500度（订货时需特殊说明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可长时间测试强腐蚀性塑料而无损仪器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型号： BRR
Model: BRR
一、满足标准：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、产品说明：
Two, product description:
此款熔融指数试验机为改良款，增加了众多功能，在仪器配置、仪器使用寿命、操作便利性、测试精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有国内一般熔融指数试验机所*的优势和性价比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、产品特点：
Three, product characteristics:
1、升温速度快，超调量极小 2、恒温精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢复恒温状态 4、试验参数校准并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手动、自动切料试验方法 6、中文液晶显示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印机，将测试结果自动打印输出
7, equipped with a printer, the results of the test automatically print output
四、主要技术参数
Four, the main technical parameters
1、挤压出料部分
1, extruding and discharging part
出料口直径：Φ2.095±0.005毫米，出料口长度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
装料筒直径：Φ9.550±0.025毫米，装料筒长度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞杆头直径：9.475±0.015毫米，活塞杆头长度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、标准试验负荷（共8级全304#不锈钢砝码）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、温度范围：常规室温——400℃（500℃可选）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒温精度：±0.5℃ 5、显示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可选手动或自动切料7、温度恢复时间：小于4分钟
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印机自动打印输出 9、电源电压：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 号 名 称 单 位 数 量 备注
The sequence number name a number of notes
1、 砝码 套 1 计8件（1#在1级负荷内）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝码托盘 件 1 在1级负荷内
2, weight tray 1 at 1 load
3、 装料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 装料杆 件 1 6、 料筒清理杆 件 1 组合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞杆 件 1 （在1级负荷内）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水准仪 件 1
8, die 19, level 1
10、纱布 卷 2 11、 打印纸 卷 2
10, gauze volume 211, Volume 2 printing paper
六、仪器特点：
Six, characteristics of the instrument:
1、全套砝码采用304不锈钢材料制作，防止生锈影响外观及砝码精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加热筒采用304不锈钢制作，因熔融指数试验机长期在高温下工作（zui高可达400~500度），高温下金属材料极易氧化生锈
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、双传感器配置，控温精确，温度梯度更好，寿命更长
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按国标要求，加料后增加四分钟倒计时功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接连接电脑输出数据（选配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、开机后可直接显示上次测试条件，避免每次用户都重新设置试验参数，减少操作人员工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高温度可达450~500度（订货时需特殊说明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可长时间测试强腐蚀性塑料而无损仪器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型号： BRR
Model: BRR
一、满足标准：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、产品说明：
Two, product description:
此款熔融指数试验机为改良款，增加了众多功能，在仪器配置、仪器使用寿命、操作便利性、测试精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有国内一般熔融指数试验机所*的优势和性价比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、产品特点：
Three, product characteristics:
1、升温速度快，超调量极小 2、恒温精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢复恒温状态 4、试验参数校准并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手动、自动切料试验方法 6、中文液晶显示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印机，将测试结果自动打印输出
7, equipped with a printer, the results of the test automatically print output
四、主要技术参数
Four, the main technical parameters
1、挤压出料部分
1, extruding and discharging part
出料口直径：Φ2.095±0.005毫米，出料口长度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
装料筒直径：Φ9.550±0.025毫米，装料筒长度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞杆头直径：9.475±0.015毫米，活塞杆头长度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、标准试验负荷（共8级全304#不锈钢砝码）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、温度范围：常规室温——400℃（500℃可选）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒温精度：±0.5℃ 5、显示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可选手动或自动切料7、温度恢复时间：小于4分钟
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印机自动打印输出 9、电源电压：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 号 名 称 单 位 数 量 备注
The sequence number name a number of notes
1、 砝码 套 1 计8件（1#在1级负荷内）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝码托盘 件 1 在1级负荷内
2, weight tray 1 at 1 load
3、 装料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 装料杆 件 1 6、 料筒清理杆 件 1 组合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞杆 件 1 （在1级负荷内）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水准仪 件 1
8, die 19, level 1
10、纱布 卷 2 11、 打印纸 卷 2
10, gauze volume 211, Volume 2 printing paper
六、仪器特点：
Six, characteristics of the instrument:
1、全套砝码采用304不锈钢材料制作，防止生锈影响外观及砝码精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加热筒采用304不锈钢制作，因熔融指数试验机长期在高温下工作（zui高可达400~500度），高温下金属材料极易氧化生锈
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、双传感器配置，控温精确，温度梯度更好，寿命更长
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按国标要求，加料后增加四分钟倒计时功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接连接电脑输出数据（选配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、开机后可直接显示上次测试条件，避免每次用户都重新设置试验参数，减少操作人员工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高温度可达450~500度（订货时需特殊说明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可长时间测试强腐蚀性塑料而无损仪器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型号： BRR
Model: BRR
一、满足标准：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、产品说明：
Two, product description:
此款熔融指数试验机为改良款，增加了众多功能，在仪器配置、仪器使用寿命、操作便利性、测试精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有国内一般熔融指数试验机所*的优势和性价比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、产品特点：
Three, product characteristics:
1、升温速度快，超调量极小 2、恒温精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢复恒温状态 4、试验参数校准并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手动、自动切料试验方法 6、中文液晶显示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印机，将测试结果自动打印输出
7, equipped with a printer, the results of the test automatically print output
四、主要技术参数
Four, the main technical parameters
1、挤压出料部分
1, extruding and discharging part
出料口直径：Φ2.095±0.005毫米，出料口长度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
装料筒直径：Φ9.550±0.025毫米，装料筒长度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞杆头直径：9.475±0.015毫米，活塞杆头长度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、标准试验负荷（共8级全304#不锈钢砝码）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、温度范围：常规室温——400℃（500℃可选）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒温精度：±0.5℃ 5、显示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可选手动或自动切料7、温度恢复时间：小于4分钟
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印机自动打印输出 9、电源电压：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 号 名 称 单 位 数 量 备注
The sequence number name a number of notes
1、 砝码 套 1 计8件（1#在1级负荷内）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝码托盘 件 1 在1级负荷内
2, weight tray 1 at 1 load
3、 装料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 装料杆 件 1 6、 料筒清理杆 件 1 组合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞杆 件 1 （在1级负荷内）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水准仪 件 1
8, die 19, level 1
10、纱布 卷 2 11、 打印纸 卷 2
10, gauze volume 211, Volume 2 printing paper
六、仪器特点：
Six, characteristics of the instrument:
1、全套砝码采用304不锈钢材料制作，防止生锈影响外观及砝码精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加热筒采用304不锈钢制作，因熔融指数试验机长期在高温下工作（zui高可达400~500度），高温下金属材料极易氧化生锈
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、双传感器配置，控温精确，温度梯度更好，寿命更长
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按国标要求，加料后增加四分钟倒计时功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接连接电脑输出数据（选配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、开机后可直接显示上次测试条件，避免每次用户都重新设置试验参数，减少操作人员工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高温度可达450~500度（订货时需特殊说明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可长时间测试强腐蚀性塑料而无损仪器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型号： BRR
Model: BRR
一、满足标准：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、产品说明：
Two, product description:
此款熔融指数试验机为改良款，增加了众多功能，在仪器配置、仪器使用寿命、操作便利性、测试精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有国内一般熔融指数试验机所*的优势和性价比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、产品特点：
Three, product characteristics:
1、升温速度快，超调量极小 2、恒温精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢复恒温状态 4、试验参数校准并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手动、自动切料试验方法 6、中文液晶显示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印机，将测试结果自动打印输出
7, equipped with a printer, the results of the test automatically print output
四、主要技术参数
Four, the main technical parameters
1、挤压出料部分
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加热筒采用304不锈钢制作，因熔融指数试验机长期在高温下工作（zui高可达400~500度），高温下金属材料极易氧化生锈
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、双传感器配置，控温精确，温度梯度更好，寿命更长
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按国标要求，加料后增加四分钟倒计时功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接连接电脑输出数据（选配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、开机后可直接显示上次测试条件，避免每次用户都重新设置试验参数，减少操作人员工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,
