品牌
代理商厂商性质
上海市所在地
品名:摄像头测试防手震稳定装置 STEVE
此机台是设计来模拟拍照时的手震频率,因手动无法重覆相同之震动,所以必须使用机台来模拟。
Stabilization Evaluation Equipment (STEVE) -
a device to check and measure the quality of image stabilization systems in cameras.
STEVE is calibrated to exhibit the best performance at the most significant frequency/ ampiltude combination of the human tremor of 4 Hz and 0.2 degrees. The whole range of the frequency and the angle of the movement corresponds to the properties of the typical tremor. For the initial setup, the mounting stage allows to adjust the camera position. The movement parameters of the two axes can be set up separay. Moving
To determine the influence of the handshake it is neccessary to combine STEVE with a test chart. We recommend our AF-Box.
Camera weight | up to 5 kg |
Moving frequency | 0.1 - 10 Hz (optimized for 2 - 8 Hz) |
Moving angle | 0.1 - 0.5 degrees (optimized for 0.1 - 0.2 degrees) |
Motion type | sine wave or individual curve |
Mean position error | < 5% within optimized range |
Standard accessory | camera mounting stage, controller box, USB cable |
Minimal system requirements | Microsoft Windows XP SP3, USB interface |
辉度箱LSB-82/B-高精度可调辉度箱
壶板电机为专业的相机测试仪器制造商,从一般传统相机至数字相机。 此一光源箱共有2856K、5500K两种色温可以切换。辉度由2.23到4585、18340 cd/m2两种可以切换。 辉度值 ① 2.23cd/㎡~18340cd/㎡(LV4~LV17) B辉度值 ②0.6cd/㎡~4585cd/㎡(LV2~LV15) 色温度 ①2854K+100K/-100K B色温度 ②5500K+300K/-300K 辉度面 100mm×100mm 电源 AC100,110,220V、50/60Hz 外观重量 300W×270H×350D、12.5kg
品名:摄像头自动对焦箱
型号:AF-BOX
详细介绍:
The autofocus box is designed to illuminate a test chart at different light levels.
In combination with the LED-Panel the AF-Box can be used for low light/bright light shutter delay measurements of digital cameras. By using the two rotary conrol units it is possible to switch from one light level to the other immediay. So two different light levels can be set by just using a switch without remeasuring the illumination level again.
品名:DIGITUS 快门延迟
The DIGITUS is a device which allows to press the shutter release button of a camera within a guaranteed time of maximum 5 ms.
It can be used on its own to release the shutter of a camera either by manually pressing a button or by letting a computer do this job (only when connected with STEVE). Furthermore in combination with STEVE automatic quality measurements of an antishake mechanism in a camera can be done. The DIGITUS can of course be used to be integrated in any automatic measurement method and is able to trigger the LED-Panel.