品牌
经销商厂商性质
广州市所在地
Midtronics BMS-100 密特汽车电池管理系统
面议
Midtronics MDX-600 AP系列密特蓄电池检测仪
面议
Midtronics XMB-9640 xEV密特新能源车电池服务工具
面议
Midtronics DCA-8000 密特动态诊断充电系统
面议
Midtronics MDX-P300密特蓄电池测试电导分析仪
面议
Midtronics MDX-700HD重型汽车蓄电池电导电路系统分析仪
面议
Midtronics CPX-900密特电池和电气系统分析仪
面议
Midtronics EXP-1000HD 密特商用车蓄电池及电路系统诊断仪
面议
Midtronics EXP-1000密特可扩展重型车辆电池与电气系统诊断仪
面议
Midtronics HYB-1000 密特混合动力汽车蓄电池系统分析仪
面议
Midtronics EXP-800 密特蓄电池电路系统诊断分析仪
面议
Midtronics MCC-070 密特汽车电池受控充电机
面议 
HI-Probes旨在与Klari生产的测量模块一起测量电流。 允许的脉冲和连续电流受到限制，连续电流低于指示的测量范围！ 此外，如果超过临界温度，则允许电流下降。 有关更多详细信息，请联系智维销售提供用户产品手册。
HI-Probes只能在规定的环境条件下使用。
注意：连续电流低于测量范围。 请参考用户手册。
| Resistor [mΩ] | Measuring range [A] | Resolution/Bit* [mA] | Maximum permanent current** [A] |
|---|---|---|---|
| 2 | -150…360 | 0,125 | 60 |
| 1 | -300…+720 | 0,25 | 80 |
| 0,5 | -600…+1440 | 0,5 | 120 |
| 0,2 | -1500…+3600 | 1,25 | 150 |
size (l/w/h): 68x27x15 mm
the shunts are linked with a copper bar 20x3,5x200 mm
* indicated for the lowest measuring range
** at room temperature (23°C)
| name | resistance value | L1 | L2 | L3 |
|---|---|---|---|---|
| HI-BF1 | 2/…/0,2 | 0 | 1…5 | 0 |
| Resistor [mΩ] | Measuring range [A] | Resolution/Bit* [mA] | Maximum permanent current** [A] |
|---|---|---|---|
| 2 | -150…360 | 0,125 | 80 |
| 1 | -300…+720 | 0,25 | 120 |
| 0,5 | -600…+1440 | 0,5 | 130 |
| 0,2 | -1500…+3600 | 1,25 | 180 |
| 0,1 | -3000…+7200 | 2,5 | 310 |
size (l/w/h): 68x27x15 mm
the shunts are linked with a copper bar 20x3,5x200 mm
* indicated for the lowest measuring range
** at room temperature (23°C)
| name | resistance value | L1 | L2 | L3 |
|---|---|---|---|---|
| HI-BF2 | 2/…/0,1 | 0 | 1…5 | 0 |
| Resistor [mΩ] | Measuring range [A] | Resolution/Bit* [mA] | Maximum permanent current shunt** [A] |
|---|---|---|---|
| 0,2 | -1500…3600 | 1,25 | 150 |
| 0,1 | -3000…+7200 | 2,5 | 250 |
| 0,05 | -6000…+8000 | 5 | 300 |
| 0,025 | -8000…+8000 | 10 | 400 |
size: (l/w/h): 150x65x40mm (without cables)
* indicated for the lowest measuring range
** at room temperature (23°C) the maximum permanent current is limited by the cross-section of the connected cables L1
Ø L1 = 35 mm2 / 70 mm2 selectable
200 A / 305 A allowed max. permanent current at 80°C
for installation in a drug battery-box instead of the stud between the batteries
Standard connection cable shoe, other connections after consultation with us
| name | resistance value | L1 | L2 | L3 |
|---|---|---|---|---|
| HI-SPECIAL | 0,2/…/0,025 | 0,7 | 1…5 | 0 |
| Resistor [mΩ] | Measuring range [A] | Resolution/Bit* [mA] | Maximum permanent current** [A] |
|---|---|---|---|
| 0,05 | -6000…+8000 | 5 | 300 |
| 0,025 | -8000…+8000 | 10 | 420 |
size: (l/w/h): 90x42x15mm
the shunts are linked with a copper bar 20x3x200mm
* indicated for the lowest measuring range
** at room temperature (23°C)
| name | resistance value | L1 | L2 | L3 |
|---|---|---|---|---|
| HI-BF3 | 0,05/…/0,025 | 0,7 | 1…5 | 0 |
