YL-1109-拉力强度试验机，拉力测试机Universal Material Testing Machine-东莞市越联检测仪器有限公司手机版

详细介绍

拉力强度试验机，拉力测试机，拉力机厂家，拉力机价格，电脑控制拉力机，材料拉力试验机

YL-1109 电脑式拉力机

用途：本机可测试橡、塑料、皮革、金属、尼龙线、织物、纸及航空、包装、建筑、石化、电工、车辆…等等材料之拉伸、压缩、弯折、剪力、粘接力、剥离、撕裂…等等试验，为品质管制、进料检验、物性试验、力学研究、材料开发之基本设备。

软件功能：测控系统是专为微机电子*试验机、微机液压*试验机、微机压力机设计的测控系统。可进行拉伸、压缩、弯曲、剪切、撕裂、剥离试验。采用PC机和接口板进行数据的采集、保存、处理和打印试验结果。可计算zui大力、屈服力、平均剥离力、zui大变形、屈服点、弹性模量等参数；可进行曲线处理、多传感器支持、图形图像化的接口、灵活的数据处理、MS-ACCESS数据库支持，使系统功能更为强大。

软件保护：超行程、超容量保护；

功能：可进行拉力、压力、剥离、撕裂、剪切、环形初粘…等测试
可同时显示力量及位移
采用步进马达驱动,精密滚珠丝杆传动，计算机直接设定试验速度
上下微调开关，具测试完成,自动回位功能
快拆式接头,能使用各种不同之夹具
全计算机操作,USB接口，进行数据分析

容量选择	10N、20N、50N、100N、200N、500N、1KN（可选双容量配制）
显示器	电脑显示方式
力量分辨率	1/500,000
力量精度	≤±0.5%
行程分辨率	0.005mm
控制方式	全电脑操作方式
试验行程	500mm 或750mm
试验宽度	Ø55mm
试验速度	5～600mm/min 电脑设定, 附夹具上下快速调节按钮
力量单位转换	kgf，N，Ibf，g，ton，Mpa
停机模式	过载停机、、紧急停止键、试件破坏自动停机、上下限设定自动停机、自动复位功能
机台尺寸	40×30×92cm （W×D×H）或40×30×120cm （W×D×H）
机台动力	步进马达驱动，同步轮及精密滚珠丝杆传动
功率	180W
机台重量	约28kg
使用电力	220V 50/60HZ 10A
标准配置	夹具1组、电脑软件、USB电脑连线；
选购	个人电脑

YL-1109 Tensile Testing Machine

Purpose:

This tester is designed for conduct tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for rubber, plastic, leather, metal, nylon line, fabric, paper, aviation, packaging, construction, petrifaction, electrician, vehicle and other materials. It is a basic equipment of quality control, receiving inspection, physical test, mechanics research, material development.

Software Function:

Test & Control System is designed for PC Electronic Universal Testing Machines, PC Hydraulic Universal Testing Machines and PC Compression testers; can conduct tensile, compression, bending, shearing, tearing and peeling test; use PC and interface board for data collection, preservation, processing and printing test result; can calculate max force, yield strength, average peeling force, max deformation, yield point, elastic modulus and other parameters; can conduct curve graphics processing, multi-sensor support, video and image interface, flexible data processing, MS-ACCESS database support, making more powerful function of system.

Software Protection: over stroke, over capacity protection.

Function:

Can conduct tensile, compression, peeling, tearing, shearing, ring initial adhesion and other test

Can display force and displacement at the same time

Adopt stepper motor drive, precision ball screw drive, set test speed by computer directly.

Up & low fine-turning switch, automatic back after test finished

Quick-release connector, can use various grips

All computerized operation, USB interface, conduct data analysis

Specification:

Capacity	1, 2, 5, 10, 20, 50, 100kg （can select double capacities preparation）
Display	Computer display mode
Force Resolution	1/250,000
Force Accuracy	≤±0.5%
Stroke Resolution	0.005mm
Control Mode	All computerized operation mode.
Test Stroke	500mm
Test Width	Ø55mm
Test Speed	5~500mm/min, can set by computer, with up & down fast adjustment button of grips
Force Unit Switch	Kgf, N, Ibf, g, ton, Mpa
Stop Mode	Overload stop, emergency stop button, specimen damage automatic stop, upper & lower limit set automatic stop, automatic reset function
Machine Dimension	40×30×70cm （W×D×H）
Machine Drive	Stepper motor drive, synchronous wheel and precision ball screw drive
Power	180W
Machine Weight	Approx 28kg
Power Supply	220V 50/60HZ 10A
Standard Device	1 set of grips, computer software, USB computer connection wire
Optional	Personal computer

产品简介

详细介绍