威格士齿轮马达型号,vickers齿轮马达价格
 和以前的10 齿齿轮泵相比，现在的13 齿齿轮泵使流量
脉动降到zui小，降低了噪声和振动。
旋转方向现场反转
安装法兰SAE A 2 螺栓
zui高连续压力+ 210 bar [3000 PSI]
zui高间歇压力 240 bar [3500 PSI]
在连续压力下的zui低转速750 RPM
在0压力下的zui大旋转扭矩4 Nm [36 lb-in]
zui高连续工作温度105°C [220 °F]
连续工作时的zui低油液粘度5.7 cSt [45 SUS]
zui低工作温度-29°C [-20°F]
在工作条件下的zui高进油口真空度0,8bar[11.6 psi]
● 困油槽溢流的改进不仅提高了功率，也使油流平稳来降低噪声。
 

威格士齿轮马达型号,vickers齿轮马达价格
 30.6 cm3 / rev. [1.87 in3 / rev.] Displacement, the highest continuous pressure is 190 bar [2750 PSI]
Additional shaft extensions, ports and mounting configurations give you a variety of options,
Easy to convert this high-performance gear pump.
  Highly finished shafts and gears improve mechanical efficiency,
Reduced wear on these parts, extended pump life and improved pump reliability.
● The most difficult oil overflow area helps to reduce the pressure pulsation and low noise work,
This also reduces the input power requirements.
Site can be reversed
• The improved new wear plate allows for easy changes in the direction of rotation of the pump in the field.
Open the pump, exchange drive gears and idler gears, change the position of the plunger, and reassemble without additional parts.
,vickers齿轮马达价格