办公桌耐压强度试验机

办公桌耐压强度试验机

参考价: 面议

具体成交价以合同协议为准
2022-02-10 18:05:03
446
产品属性
关闭
东莞美和检测仪器有限公司

东莞美和检测仪器有限公司

免费会员
收藏

组合推荐相似产品

产品简介

椅桌凳冲击试验机,强度试验机进口机型一共二十多种,涵盖办公家具各类功能检测仪器。符合標準:GB/T10357./EN1728./ANSI BIFMA X5.1./BS4875/BS EN527/BS EN581/BS EN1335.等

详细介绍

 

 
椅桌耐冲击试验机,椅桌床耐压强度试验机,办公家具耐久性试验机,办公桌耐冲击试验机                                      
桌子測試儀器                                            
測試項目:桌子的穩定性和桌面衝擊。                      
 
1、 垂直负载下的稳定性试验:
Stability test of the vertical load
把试件放在试验基面上。在其zui不稳定桌边中心离边沿向内50mm桌面处通过加载垫垂直向下逐渐加力到规定的力值或者至少试件至少有一个桌脚离地为止。
Place test specimen on the base surface. Impose the force to the table in its center from the edge of the most unstable inward 50mm desktop vertically down through the loading pad gradually with augmented the value or at least one specimen legs up off the ground.
2.垂直和水平加载稳定性试验:
Vertical and horizontal load stability test
把试件放在试验基面上。用挡块挡住试件zui不稳定边的桌脚。防止试件在试验中移动。在该边中心离边沿向内50mm桌面处通过加载垫垂直向下施加100N的力。同时在该边中心桌上向外施加一个水平力。逐渐增加该力到规定值或者至少有一个桌脚离地为止。
Put the specimen on the test-based surface. With the block blocking the most unstable side of the specimen legs to prevent the test specimen to move. The edge center from the edge inward 50mm desktop department exert downward vertical 100N force by loading pad. While exert a level force on the center desk of the edge, increase gradually to a specified value or one leg near to the floor at least.
3.垂直静载荷试验:
Vertical static load test
在桌面易于发生破坏的位置,按规定的力通过加载垫,垂直向下重复施加10次。每次至少应保持10秒。
On the most easy damaged position of the desk surface , to impose the specified force by loading pad, vertical put down repeated 10 times. Keep 10 seconds at least.
Desktop sustained vertical load test
上一篇:耐洗色牢度试验机用途原理 下一篇:振动试验机说明书
热线电话 在线询价
提示

请选择您要拨打的电话: