品牌
经销商厂商性质
北京市所在地
HCM2000-YSL系列磁通门电流传感器的初、次级之间是绝缘的，可用于测量直流、交流和脉冲电流，具有良好的精度和线性度，可达0.01%, 可用于超高精度的电流测量。
(HCM2000-YSL Series Fluxgate -effect Current Sensor between primary and secondary is insulated, can be used for the measurement of DC, AC and pulse current. Good accuracy and linearity, up to 0.01%, can be used for ultra-high accuracy current measurement)
电气参数（Electrical characteristics） 型号Type HCM2000-YSL Ipn 额定输入电流 Rated input 2000 A Ipm 测量电流范围 Measuring range 2400 A Rm 测量电阻 Measuring resistance @±15V @±2400A max 3(max) @±24V @±2400A max 5(max) Ω KN 匝比 Turns ratio 1：2000 Iout 输出电流 Rated output current 1000 mA Rs 次级线圈内阻 Secondary coil resistance 8 Ω Io 零电流失调 Zero offset current ＜0.005 mA Vc 供电电源 Supply voltage ±15±5% (±24±5%) V Ic 静态功耗 Current consumption ≤60+Iout mA Iot 零点温漂 Thermal drift of Io -10～+70℃ ±0.01 mA F 带宽 Frequency bandwidth(-3dB) DC～100 KHz εG 精度 Accuracy ±0.01 % εL 线性度 Linearity ±0.01 % di/dt 跟随精度Accurately followed ＞200 A/μS Tr 响应时间 Response time ≤1 μS Vd 绝缘电压 Insulation voltage 5.0 KV Ta 工作温度 Ambient operating temperature -10～+70 ℃ Ts 储存温度 Ambient storage temperature -25～+80 ℃ M 重量 mass 1200 g 标准Standards EN50178/IEC61010-1/UL94-Vo/ROHS 使用说明Remarks 1、 应用：新能源、航空、铁路、电网、汽车、不间断电源UPS、斩波器、医疗设备、整流、电源监测、电焊机、变频、开关电源、电池监测、电动机监测等领域。Application: New energy, aviation, railway, power grid, automobile, UPS, chopper, medical equipment, rectification, power monitoring, electric welding machine, frequency conversion, switching power supply, battery monitoring, motor monitoring and other fields. 2、 传感器的输出幅度可根据用户需要进行适当调节。The amplitude of the output of the sensor can be appropriately adjusted according to user needs. 3、可按用户需求定制不同额定输入电流和输出电压的传感器。Custom different rated input current and the output voltage of the sensor. 4、辅助电源接通后，绿灯常亮为正常工作；若接通辅助电源后绿灯不亮，应检查辅助电源是否正常。当原边电流过载时，绿灯也会熄灭，恢复正常测试范围后，绿灯会继续点亮。After the supply power is connected, the green light is always on for normal operation; If the green light does not light up after the supply power is connected, check whether the supply power is normal. When the primary current is overloaded, the green light will also go out. After returning to the normal test range, the green light will continue to light up.
HCM2000-YSL.pdf
