DI-9M-8-思达数显扭力测试仪-东莞市必途仪器有限公司手机版

详细介绍

思达数显扭力测试仪
产品特点
Management of electrik screw driver
●Torque Meter DI-9M-8/08
DI-9 series is most suitable for checking and controlling the torque of
Electric Screwdriver and Torque Driver.
The conventional function remains as it is. Further
(1) High and low limits judging function .
(2) The maximum, the minimum, and the average can be checked.
思达数显扭力测试仪

New function
1. High and low limits judging function. A setup is possible respectively in a maximum
value and a minimum value. GOOD/NG is checked with an LED lamp

(GOOD)

(NG)
2. Display and Preservation of Maximum, Minimum Value, and Average
Measurement by the side of rewinding (CCW) can be performed.

□ Save 300 data.
□ A convenient functional setup of a setup of a measurement start value etc.
□ About the load torque under measurement, it is a data output at real time
(every about 1 / 100 seconds)
The best for everyday check of an electric driver
Wide measurement range (0 - 8000digit),
it corresponds to various set torques
Can measure without inversion/
rolling-back work efficiently by OW joint (PAT.P).
The conventional main functions
□ Rechargeable battery drive
□ By the auto power OFF, it forgets to erase and prevent.
□ By the RS232C output, it is personal computer management about data.
□ One-touch zero adjustment
□ Measured-value display automatic clear setup
性能参数

Specification	DI-9M-8	DI-9M-08
Measuring range	0.030-8 N･m	3.0-800 mN･m
	0.30～80 kgf・cm	0.030～8 kgf・cm
	0.30～70 lbf・in	0.030～7 lbf・in
Accuracy	±0.5% (499 digit or less ±3digit)
Display	The 4 figures digital display of LCD
The measurement direction	CW-CCW (right and left)
Zero return by one touch	Return to zero by pressing clear button.
Measurement Mode	Track,/Peak/Peak-Down
High and low limits judging function	High and low value are measurement within the limits, and can be set up.
Real-time Output	Load torque value is outputted every about1/ 100 second by RS232C.
The Maximum, the minimum, and the average value display	The maximum, the minimum, average value, and the data number of 30 data are displayed.It saves to ten channels.
Data transfer	Serial interface RS232C (Baud rate:9600)
Auto power save	10 minutes no use, automatically switch off.
Power supply	Ni-Cd chargeable battery 1.2V × 5cells 700mAh
Charging time	From empty - Less than 6hours
Continuous working time	About 12hours
clearance	It is a display clearance in set-up time. (0.1 - 3.0 sec)
Socket size	□ 20mm/ □9.5mm
Dimension / Weight	W:155×D:125×H:55 / About 1kg
Recommend buffer accessories	Measuring joint OW-20/OW-60	Measuring joint OW-025/OW-10
	Cube (with a 5th page screw hole) 20x20x20 (M2.6/M3/M4/M5/M6 Tap processing)
	AC/DC adaptor (Please choose AC adaptor out of 120V, and 230V.)
	Exclusive receipt case
	An inspection report, a proofreading certificate, a traceability system figure

产品简介

详细介绍