GiganetixStandardSer-北京汇力城技术有限公司手机版

详细介绍

产品介绍

与GigE兼容的硬件以及驱动接口、紧致的35mm*35mm外壳封装完美地集成在现有的低成本系统中。该相机系列拥有的成像质量：低噪声、可选择与4 Aptina CMOS, 10 Sony and 3 Truesense Imaging等CCD传感器结合。2µs的触发延迟使相机和频闪照明达到了同步。这些相机设计运用了工业标准（C-mount镜头适配器, Hirose-插头, RJ45-插头适用于 CAT5e 或 CAT6 控制线），可以显著降低机器视觉系统的成本。

■ 仅有~2µs的触发延迟, 抖动误差（jitter）小于0.5µs

■ 以太网供电(PoE)

■ 可部分扫描，提取兴趣特性区域

■ 水平和垂直像素合并（binning)

■ 极小的热噪声，低功耗

■ 优越的抗震性

■ 以太网更新软件

■ 精确的图像传感器校准

■ 硬件和软件兼容GigE Vision和GenCam

■ 工业标准连接器: Hirose 12 针脚及有防脱落螺丝的RJ45

■ 以太网电缆传输距离达100m

■ 即插即用, 将您的相机与以太网连接

■ 铝合金外壳

■ 标准C-Mount镜头适配器

■ 密封的图像传感器

■ 光电隔离输入和输出

相机型号及参数

型号	传感器	传感器技术	分辨率	帧率	光学尺寸	像素尺寸
GC1281M	Aptina MT9M001	CMOS, Rolling shutter	1280x1024 1.3 MP	30 fps	1/2"	5.2 µm
GC2041C	Aptina MT9T031	CMOS, Rolling shutter	2048x1536 3.1 MP	12 fps	1/2"	3.2 µm
GC2591M	Aptina MT9P031	CMOS, Rolling shutter	2592x1944 5.0 MP	14 fps	1/2.5"	2.2 µm
GC2591C
GC3851M	Aptina MT9J003	CMOS, Rolling shutter	3856x2764 10.7 MP	7 fps	1/2.3"	1.67 µm
GC3851C
GC651M	Sony ICX618	CCD, Progressive	658x494 0.33 MP	120 fps	1/4"	5.6 µm
GC651C
GC652M	Sony ICX424	CCD, Progressive	658x494 0.33 MP	97 fps	1/3"	7.4 µm
GC652C
GC653M	Sony ICX414	CCD, Progressive	658x494 0.33 MP	97 fps	1/2"	9.9 µm
GC653C
GC781M	Sony ICX415	CCD, Progressive	782x582 0.45 MP	68 fps	1/2"	8.3 µm
GC781C
GC1031M	Sony ICX204	CCD, Progressive	1034x778 0.81 MP	30 fps	1/3"	4.65 µm
GC1031C
GC1291M	Sony ICX445	CCD, Progressive	1296x966 1.3 MP	30 fps	1/3"	3.75 µm
GC1291C
GC1391M	Sony ICX267	CCD, Progressive	1392x1040 1.4 MP	20 fps	1/2"	4.65 µm
GC1391C
GC1392M	Sony ICX285	CCD, Progressive	1392x1040 1.4 MP	32 fps	2/3"	6.45 µm
GC1392C
GC1621M	Sony ICX274	CCD, Progressive	1628x1236 2.0 MP	25 fps	1/1.8"	4.4 µm
GC1621C
GC2441M	Sony ICX625	2 Tap CCD, Progressive	2448x2058 5.0 MP	15 fps	2/3"	3.45 µm
GC2441C
GC1021M	Truesense KAI-01050	2 Tap CCD, Progressive	1024x1024 1.0 MP	61 fps	1/2"	5.5 µm
GC1021C
GC1601M	Truesense KAI-02050	2 Tap CCD, Progressive	1600x1200 1.9 MP	35 fps	2/3"	5.5 µm
GC1601C
GC1921M	Truesense KAI-02150	2 Tap CCD, Progressive	1920x1080 2.1 MP	33 fps	2/3"	5.5 µm
GC1921C

Giganetix Standard Series

The fully GigE Vision compliant hardware and driver interface combined with a compact housing at 35x35mm footprint allows for seamless integration in existing cost-sensitive systems. This camera series offers superior image quality with minimal noise and a comprehensive feature set combined with a fine selection of 4 Aptina CMOS, 10 Sony and 3 Truesense Imaging CCD image sensors. Top-of-class trigger latency of ~2µs allows for optimal synchronization of camera arrays with strobe illumination. Throughout the design of these cameras, utilization of industrial standards (C-mount, Hirose-plug, RJ45-plug for CAT5e or CAT6 cables) enables significant reduction of the total costs of your machine vision system significantly.

Features

■ Wide selection of high-end CCD/CMOS sensors from Aptina, Sony and Truesense Imaging

■ Compact footprint 35x35x48 mm

■ Exposure time programmable from 10µs to 10s

■ Trigger latency of just ~2µs, jitter <>

■ Power over Ethernet (PoE)

■ Partial scan and area of interest features

■ Horizontal and vertical binning

■ Minimal thermal noise, low power consumption

■ Excellent shock and vibration resistance

■ Firmware updates via Ethernet

■ Precise mount to image sensor alignment

■ Fully GigE Vision and GenCam compliant hardware and software

■ Industrial standard connectors: Hirose 12 pin and RJ45 with screw lock

■ Ethernet cables allow for operating distances up to 100m

■ Plug & Play, attach the camera to your Ethernet network and start working

■ Anodized aluminum housing

■ Standard C-Mount lens adapter

■ Sealed image sensor

■ Opto-isolated inputs and outputs

■ 3 years warranty

相机性能

■ 可选择多种 CCD/CMOS 传感器：Aptina, Sony 和Truesense Imaging

■ 紧致的封装 35x35x48 mm

■ 从10µs 到 10s的可编程曝光时间

产品简介

详细介绍