SM2-D2048x1088(I/C)-

SM2-D2048x1088(I/C)-

参考价: 面议

具体成交价以合同协议为准
2021-01-19 09:48:54
253
产品属性
关闭
北京汇力城技术有限公司

北京汇力城技术有限公司

免费会员
收藏

组合推荐相似产品

产品简介

瑞士Photonfocus工业相机

详细介绍

产品介绍
    智能相机SM2-D2048x1088(I/C)-TI6455-96-GB-10 基于CMOSIS CMOS图像传感器CMV2000 。该CMOSIS CMOS图像传感器CMV4000 能优化低光照条件,可以作为标准单色、近红外增强和彩色版本。智能相机SM2-D2048x1088(I/C)-TI6455-96-GB-10一个1.2GHz DSP实现于德克萨斯仪器公司(TI)和几个接口。
    高速线扫描相机的模式是实现在一个相机模块使用智能线性相机超过27kHz线率。两线扫描模式可以用一个颜色传感器实现智能彩色线扫描相机,超过20kHz的线路速率。
    可以使用在发展中的几个软件和调试工具。一个框架和应用在智能相机SM2-D2048x1088(I/C)-TI6455-96-GB-10的帮助下设置完整的应用。用于图像处理的软件库,从MvTech开放源码库用于OpenCV或 Halcon Embedded 9.0。

 

 
 
      The smart cameras SM2-D2048x1088(I/C)-TI6455-96-GB-10 are based on the CMOSIS CMOS image sensors CMV2000. The CMOSIS CMOS image sensors CMV2000 are optimized for low light conditions and are available as standard monochrome, as NIR enhanced (I) and as colour (C) versions. In the smart camera SM2-D2048x1088(I/C)-TI6455-96-GB-10 a 1.2 GHz DSP from Texas Instruments (TI) and several interfaces are implemented.
      A high speed line scanning mode is implemented in the camera module to enable the usage as inligent line camera with over 27kHz line rate. the two line scan mode can be used with colour sensors to implement a inligent colour line scan camera with more than 20kHz line rate.
      In the development several software and debugging tools could be used. A frame work and examples helps to setup the complete application with the smart camera SM2-D2048x1088(I/C)-TI6455-96-GB-10. For the image processing own software libraries, open source libraries as OpenCV or Halcon Embedded 9.0 from MvTech could be used.
Camera SM2-D2048x1088(I/C)-TI6455-96-GB-10

Speed grade

 
-96
frame rate
75 fps
One line mode (B/W NIR)
27 kHz
Two line mode (Colour)
20 kHz
Grey Level
10 Bit

 

Sensor Properties CMOSIS CMV4000
      ■ 2/3" CMOS image sensor
      ■ 2048 x 1088 pixel (2.2 megapixel resolution) 
      ■ pixel size: 5.5 µm x 5.5 µm 
      ■ Global Shutter
      ■ Micro lenses
      ■ Full Well Capacity 11 ke-
      ■ spectral range: 350 - 900 nm
Camera Properties
      ■ configurable region of interest (ROI)
      ■ Up to 8 regions of interest (MROI) and decimation
      ■ 2 look-up tables (10-to-8 bit) on user-defined image region (Region-LUT)
      ■ Crosshairs overlay on the image
      ■ ultra low trigger delay and low trigger jitter
      ■ lens mount: C-Mount (option CS-Mount)
      ■ MV form factor: 55 x 55 mm² (W x H)
DSP Module Properties TMS320C6455
      ■ High performance fixed point DSP TMS320C6455
      ■ 0.83 ns instruction cycle, 1.2 GHz clock
      ■ Eight 32-Bit instructions/cycle
      ■ 9600 MIPS/MMACS (16 Bit)
      ■ 512 MB SDRAM
      ■ 2GB SD card
      ■ JTAG program interface
      ■ Isolated inputs and outputs
      ■ RS422 interface
      ■ GigE Interface, configurable for 10/100 MByte/s Ethernet
Description
      This camera focus on demanding applications in industrial image processing where an embedded system is an alternative to PC system approaches. The camera is optimized for low light applications. Due to the global shutter, even high-speed applications with exposure times in the µs-area are possible. The implemented high performance DSP TMS320C6455 from Texas Instruments (TI) enables leading edge applications with this embedded system.
      For the software development the TI CodeComposerStudio (CCS) is neccessary. Photonfocus supports the newest version 5.3. The single user license (N01D) could be ordered from the TI homepage. For the first steps the 90day evaluation version (CSS-FREE) could be used which has no restrictions. To program the camera a JTAG adapter is necessary which could be ordered together with camera.
      Additional information about the CodeComposerStudio (CCS) from TI:
      
      
      For debugging of the camera system an emulator is needed. The emulator XDS200 from TI is supported by the CCS. Due to the USB interface this emulator could also be used for developments together with notebooks.
      Further information about the TI emulator XDS200 could be found here:
      

      The framework and also the examples for the smart camera are based on CCS 5.x. Photonfocus provides also the source code of the framework to enable fast design-in cycles of user inplementations. There are also examples which does not use the framework. These examples show how to use the basic functions of the camera.
      On the SM2 microSD card following items are stored:
      all needed files for CCS development (framework, source code, libraries, examples) in a zip file,
      camera manual and source code documentation,
      VIBFinder.exe, this windows tool finds the connected camera if the user does not know the camera IP address,
      tcpdisplay.jar, JavaApplet to connect to camera build-in webserver and
      Ethernet.ini, to change the camera IP-address, default address is: 192.168.1.240.
Product Availability
      SM2-D2048x1088-TI6455-96-GB-10 for sale
      SM2-D2048x1088I-TI6455-96-GB-10 on request
      SM2-D2048x1088C-TI6455-96-GB-10 on request
      SM2 JTAG Adapter for sale
 
 

 

上一篇:穿梭未来:探索直线导向装置的奥秘 下一篇:无油滚珠轴承已经成为了一项重要的设备
热线电话 在线询价
提示

请选择您要拨打的电话: