便携式移动式污泥脱水设备

 产品简介

立丰环保是污泥脱水集成处理的专业设备制造商。针对不同的情况，我们提供便携式移动式污泥脱水设备或传统脱水系统的解决方案。该系统具有可靠性，实用性，现场即插即用的特点。所有的设备集中在一个车厢内，我们预安装好MDS / TRP污泥脱水机、自动泡药机、搅拌器、絮凝槽、泵和电线，以保证处理效果和zui短处理时间。

LIFENG is professional manufacturer of sludge dewatering containerized plants. For each case, we provide a solution which is going to use portable system or stationary. You will get reliable and practical plants and only need plug and play at site. All procedure of machines is sort inside one container. For best performance we use the MDS/TRP with sludge dewatering machine completed with automatic dosing device, agitator, tanks, pumps included cabling, everything pre-installed. This enables us to reach very short processing time.

    立丰环保PSSD（便携式移动式污泥脱水设备）是一种高效率的环保系统，处理后污泥的体积减量高达90％，脱水泥饼含固率通常为20％±5%。立丰环保研发的移动式污泥脱水系统，主要应用于化粪池，垃圾服务站点，含油污水，洗车水，污水处理厂，沟渠池塘及其他需要固液分离场合。

LIFENG PSSD（portable sewage sludge dewatering）system is an environmental friendly system with high efficiency that gives a volume reduction of up to 90 % and a dry solid percent of typically 20％±5% in the dewatered sludge. LIFENG is developed for portable sewage sludge dewatering in connection with emptying of septic tanks, service stations, petrol &oil separators, carwash, WWTP, Gully’s etc.

 流程图

立丰环保PSSD系统的有效性是基于我们过去多年发展的经验形成的，其目标是提高该系统的稳定性，效率和增强功能。下面简要描述立丰环保 PSSD系统的工作流程。

LIFENG PSSD effectiveness is based upon our experience over the last many years of development, where the objectives have always been to increase stability, efficiency and increase the functions of LIFENG PSSD system. A basic description of how LIFENG PSSD system works is briefly described below. 

1.LIFENG PSSD can be operated from the control panel.  

立丰环保PSSD系统通过电控柜控制。

2.The sludge is taken up into the sludge cutting machine by pump.

污泥通过泵输送到污泥切割机

3.After sludge has been cut, the sludge is then pumped into the flocculation tank. During this process a polymer is added to cause floc.. Than the sludge flows into dewatering machine after flocculation being formed by polymer reaction between sludge and polymer.

污泥切割后，将污泥输送到絮凝槽中。 在该过程中，加入聚合物絮凝。经过污泥和聚合物之间反应形成矾花之后，污泥流入脱水机中。

4.While the sludge is being transported to the dewatering machine, the operator can return the cleansed water back to its source, this keeps the process time to a bare minimum, just one of the many practical functions which makes LIFENG PSSD easy and efficient to operate.

当污泥被运送到脱水机时，操作者可以将净化后的水返回到原水池中，处理时间短，这是立丰环保PSSD系统操作简单，高效的众多实用功能之一。

5.LIFENG PSSD could discharge sludge cake directly.

立丰环保PSSD系统可直接排出泥饼。

 特征

1.设计紧凑，所有设备集中在一个车厢内。

Compact design, all procedure of machines is sort inside one container.

2.移动式系统可快速响应突发事件及*式运维服务

Fast delivery and start-up because of the portable concept

3.处理效果佳，污泥的体积减量达到60%-90%

Good performance, an approximate volume reduction of between 60%-90%.

4.现场土建面积少，可移动，大大减少了运输时间，运行成本和人工成本

Minimum construction work on site and easy to relocate, so transport time, running and labor costs are greatly reduced.

5.操作简便且维护成本低廉

Low maintenance and minimum operation requirements

6.多年的各行业实践经验累计

Many years development experience

 应用

立丰环保PSSD系统专门为城市和农村等传统系统难以运行的区域而设计。

对于处理含水率较高的污泥或需要重新填充排空的化粪池等应用，立丰环保PSSD 系统比传统系统更具有优势。

LIFENG PSSD has been specifically designed for operating in restrictive areas, such as in urban and rural situations where traditional systems have difficulty. Dewatering with LIFENG PSSD system has its advantages over traditional systems, where sludge’s with a relatively high water content are found, where there is a need to refill the emptied tanks, e.g. septic tanks. 

        垃圾服务站点 Service stations                      沟渠   Gully

     化粪池 Septic tanks                           洗车水  Carwash

                 污水处理厂 WWTP                      含油污水 Oil separators

 结构

 选型表