低温冷冻喷雾干燥机技术参数/低温冷冻喷雾干燥机怎么卖/哪里的好

Technical parameters:

1, small spray drying machine adopts automatic control and manual control dual control mode, the whole experiment process color touch screen dynamic display (animation)

2, inlet air temperature control: 30 ℃ ~ 400 ℃

Outlet air temperature control: 3, 30 ℃ ~ 200 ℃

4, evaporation of water, 1500 ml/H ~ 2000 ml/H

5 and the feed rate of the biggest: peristaltic pump can be adjusted up to 2000 ml/h

6 and the feed rate of minimum: 50 ml

7, can be upgraded to the two-stage separation collection system

8, real-time PID temperature control technology, into the wind and the wind temperature real-time online, according to the temperature control precision of plus or minus 0.5 ℃

9, the drying time: 0.8 ~ 1.0 S

10, the machine has the wrong operation protection function, when the fan and heater switch using order by mistake, the machine automatically reminds, novice to prevent wrong operation along the bad machine.

11, small spray drying machine for machine protection function: turn it off, simply press the stop button when the machine in addition to the fan to immediay stop operation, ensure the equipment won't because of wrong operation (forced off the fan) and cause heating part of the burn out.

12 parameters, color LCD touch screen display: inlet/outlet temperature/peristaltic pump speed/air/frequency of needle

13, nozzle diameter: 0.5 mm / 0.7 mm / 0.75 mm / 1.0 mm / 1.5 mm / 2.0 mm optional, and can customize according to the requirements

14, a nozzle cleaner (needle), when the nozzle blockage, will automatically be removed, the frequency of needle can be adjusted automatically

15, spray dryer machine full stainless steel, two fluid spray atomization structure, spraying, drying and collecting system adopts transparent quality high borosilicate heat-resistant glass materials

16, built-in imported oil-free air compressor, powder particles diameter normally distributed, good liquidity, and the noise is very low, in line with national standards for laboratory;

17, inligent control system to replace the PLC control on the market, the stronger stability

18 and time setting function: users can set the machine's working time, without artificial guards, work time to end the machine stop work, without artificial guards, great save customers valuable time doing experiments.

19, fan automatic stop function: instrument after work, should keep the fan working condition, so that the glass part of cooling, the machine through the smart program, when the inlet temperature is less than 30 degrees, the fan automatically shut down, don't need to manually close the fan.

20, the machine power: 3.8 KW / 220 v

21, purging device, the tower wall material yield is higher

22, spray head cooling device (optional)

23, can be directly upgraded to used in organic solvent materials dry nitrogen circulation system

24, equipment size: 1380 mm (high) (long) x 590 mm x 770 mm (wide)

产品名称：小型喷雾干燥机

产品型号：JOYN-8000T

厂家：刘萍

：150 2109 3014

:

技术参数:
1、小型喷雾干燥机采用全自动控制与手动控制双重控制模式，整个实验过程彩色触摸屏动态显示（动画）
2、进风温度控制：30℃～400℃
3、出风温度控制：30℃～200℃
4、蒸发水量：1500mL/H～2000ml/h
5、zui大进料量：蠕动泵可调zui大为2000ml/h
6、zui小进料量：50mL
7、可升级成双级分离收集系统
8、实时PID控温技术，进风温度和出风温度实时在线显示，控温精度±0.5℃
9、干燥时间：0.8～1.0S
10、机器具有误操作保护功能，当风机和加热器开关使用顺序按错时，机器自动提醒，防止新手误操作顺坏机器。
11、小型喷雾干燥机具有关机保护功能：关机时只需按停止键，机器除风机外立即停止运行，保证设备不会因为误操作（强行关风机）而导致加热部分烧坏。
12、彩色LCD触摸屏参数显示：进风口温度/出风口温度/蠕动泵转速/风量/通针频率
13、喷嘴口径：0.5mm/0.7mm/0.75mm/1.0mm/1.5mm/2.0mm可选，并可根据要求定制
14、设有喷咀清洁器（通针），在喷咀被堵塞时，会自动清除，通针的频率可自动调整
15、喷雾干燥机整机全不锈钢制作,二流体喷雾的雾化结构，喷雾、烘干及收集系统采用透明的优质高硼硅耐热玻璃材料制造
16、内置进口全无油空压机，喷粉的颗径呈正态分布，流动性好，而且噪音非常低，符合国家实验室噪音标准；
17、智能型控制系统，取代市场上的PLC控制，稳定性更强
18、时间设定功能：用户可以自行设定机器的工作时间，无需人工看守，工作时间结束机器停止工作，无需人工看守，*的节省客户做实验的宝贵时间。
19、风机自动停止功能：仪器工作结束后，应该保留风机工作状态，以便玻璃部分冷却，本机器通过智能程序设定，当进口温度低于30度时，风机自动关闭，无需人工手动关闭风机。
20、整机功率：3.8KW/220V
21、塔壁吹扫装置，物料得率更高
22、喷雾头冷却装置（可选）
23、可直接升级成应用于有机溶剂物料干燥的氮气循环系统
24、设备尺寸：1380mm(高）×770mm（长）×590mm（宽）

上海喷雾干燥机/有机溶剂喷雾干燥机/喷雾干燥机