1、切边，同时修边，单边切除，并进行熔边效应，使边缘光滑顺畅不粗糙，无毛边，达到品质的要求。 2、缕孔 切出缕空的各种花形的孔，缤纷作熔边处理。 3、转移印花 将转印纸或金泊纸转到材料上。 4、熔接 二层或多层材料熔接在一起，无线无针代替缝纫且熔接强度良好。 5、开条 对材料进行单条或多条同时开切，并作熔边处理无毛边。 6、成形 按花轮花纹，同时作切除，裂孔，印纹，使成品一次成形。 1. The operations of side scrap and trimming can be carried out at the sane time. The side in one side and side melting can be carried out at the same time. 2. Make holes The holes with different patterns can be cut and the treatment of side melting can be carried out too. 3. Transfer printing Transfer-printing the transfer paper or golden foil paper on the materials 4. Melting weld Two layers or multi-layers can be melted together. It is not necessary to use thread and needle. This process can replace sewing . Moreover the melted strength is excellent. 5. Cut material This machine can cut material for single piece at the same time. Moreover it can carry out the treatment of side melting.There is no coarse side. 6. Forming Press the patten wheel. At the same time the process of cutting . hole breaking and patter printing can be carried out. It makes the produt form in one time.
