德国IDEAL闪光对焊机 BAS 040

产品说明：

德国IDEAL Bandsaw Flash Butt Welder te BAS 040

BAS040型IDEAL闪光对焊机

for flash butt welding of 　闪光对焊的适用范围：

Metal bandsaws (bi-metal, carbon steel bandsaws,

tungsten bandsaws)                               3 - 27 mm

金属带（双金属，碳钢带锯，钨合金带锯）

Meat and fish bandsaws(stainless steel) 5 - 20 mm

肉和鱼带锯刀片（不锈钢）

Wood bandsaw 5 - 40 mm

木头带锯刀片

Band knives 5 - 20 mm

带形刀

(The above mentioned dimensions refer to a minimum strip thickness of 0,4 mm)

（以上尺寸所涉小厚度为0.4毫米及以上。）

Capacity of transformer at 50 % duty cycle 　　　　　　　　　　　3,5  kVA

变压器额定容量（50%负载）

Machine description:

机器说明：

Machine case made out of welded steel sheet with vertical cast iron face plate – high precision guide of the movable jaw –  automatic control of the flashing cycle by the gear unit drive with notches  –  upsetting  by  means  of  a  pile  of  cup  springs  –  wide  distance  of  jaws  for  annealing adjustable  with  lever  –  adjustment  of  weld  current  in  4  steps  –  electronic  controlled  annealing device  for  infinite  adjustment  of  the  anneal  voltage  –  clamping  device  with  manual  levers suitable for band tools upto 40 mm width

机壳由焊接钢板和垂直铸铁面板组成－移动颚的导向－由齿轮传动装置档电弧周期自动控制；焊端顶紧由一束盘型弹簧实现－用于退火的颚宽用杠杆调节－焊接电流4级可调－电子控制退火装置无限调节退火电压－带手动杠杆的夹紧装置满足40毫米宽的带具；

IDEAL Square Cutter te AHE 050

AHE050型带锯直角切割器

for separate mounting to work table

to produce burr-free, square cuts at bandsaw blades up to a width of 50 mm

单独固定在工作台上；带宽达50 mm带锯刀片的刺直角切割；

IDEAL Special Grinding Machine te SMH 060

SMH060型磨边机

for  removing  the  weld  burr  -  Grinder  as  separate  unit  to  be  mounted  to  customer  work  table  - machine made for maximum band width of 60 mm - manual clamping device for band with weld joint - grinding by 3 phase motor and continously adjustable grinding wheel

去除焊疤－作为单独装置固定在用户的工作台上；适合带宽60 mm；

工作原理:

Working Principle:

The working principle of the imported welder: the working metal piece to be welded is pressed between two electrodes, when the power is on, the energe(current) generates, and flows through the work piece contact surface and the adjacent zone, resulting in resistant thermal effects which heat the work piece into molten or plastic state, thus plays the function of welding the metal.  

本次的焊接机的工作原理为：是将被焊（金属）工件压紧于两电电子之间，通电后产生的能量（电流），利用电流流经工件接触面及邻近区域产生的电阻热效应将其加热到熔化或塑性状态，从而起到焊接金属的功能。