burkert 6013宝德

The pressure port in the manifold is specified as P (R) and USES the exit port of A (B). Only ports are joined together using the same name.

The 2/26013 type three-way valve can be operated in a flow shape with 3/26014 three-way valve, circuit function c. If run (not D or T!)

The pressure depends on the nameplate. If the valve function is considered, the manifold can be expanded. Connector sub

The O - ring is used to connect the port to P (R).

Attention! Unused open valve opening must be closed with cover (see attachment). The manifold should be a fixed upper rail.

该歧管中的压力端口被为P（R），并用A（B）的出口端口。只有端口使用相同的名称连接在一起。

2/26013型三通阀可以一起流形上进行操作与3/26014型三通阀，电路功能c。如果运行（不是D或T！）
压力根据铭牌同意。如果阀功能被考虑到歧管还可以扩大。连接器接头
用O形环用于连接在P（R）的端口。
注意！未使用的，开阀口必须用盖板（见附件）被关闭。歧管应该是固定的上轨。 

burkert 6013宝德

更多宝德产品和选型可以销售人员。