倍加福/P+F 品牌
经销商厂商性质
上海所在地
上海桂伦常年备货倍加福限位开关
￥1999
支持技术服务现货倍加福传感器
￥11
德国P+F接近开关NBN8-18GM50-E2-T
￥16
德国倍加福PGV100-F200A-R4-V19传感器
面议
倍加福传感器NJ4-12GM-N-V1 现货
面议
编码器PVS14N-05MK2A6B1-0013德国倍加福
面议编码器PVS58N-011AGR0BN-0013德国倍加福
面议
P+F光电传感器ML100-8-1000-RT/95/103
面议
倍加福编码器PVS58N-022AGR0BN-0013
面议
倍加福传感器 接近开关 P+F 现货
面议倍加福编码器PVS58N-011AGR0BN-0016
面议倍加福编码器PVS14N-05MK2A12B0-0013
面议德国PEPPERL+FUCHS接近开关，现货*-*桂伦！订购
德国PEPPERL+FUCHS接近开关，现货*-*桂伦！订购
：韩工
工作：-8031
工作
| 产品阐述 | ||
|---|---|---|
| Single head system | ||
| General specifications | ||
|---|---|---|
| Sensing range | 80 ... 2000 mm | |
| Adjustment range | 120 ... 2000 mm | |
| Dead band | 0 ... 80 mm | |
| Standard target plate | 100 mm x 100 mm | |
| Transducer frequency | approx. 180 kHz | |
| Response delay | 65 ms minimum 195 ms factory setting | |
| Indicators/operating means | ||
| LED green | solid: Power-on flashing: Standby mode or program function object detected | |
| LED yellow 1 | solid: object in evaluation range flashing: program function | |
| LED yellow 2 | solid: object in detection range flashing: program function | |
| LED red | solid: temperature/program plug not connected flashing: fault or program function object not detected | |
| Temperature/TEACH-IN connector | Temperature compensation , Evaluation range programming , output function setting | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS | |
| Power consumption | ≤ 900 mW | |
| Interface | ||
| Interface type | RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit | |
| Input/Output | ||
| Synchronization | bi-directional 0 level -UB...+1 V 1 level: +4 V...+UB input impedance: > 12 KOhm synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms | |
| Synchronization frequency | ||
| Common mode operation | max. 30 Hz | |
| Multiplex operation | ≤ 30 Hz / n , n = number of sensors , n ≤ 5 | |
| Output | ||
| Output type | 1 current output 4 ... 20 mA 1 voltage output 0 ... 10 V | |
| Switch-on delay | < 150 ms | |
| Resolution | evaluation range [mm]/4000, but ≥ 0.35 mm | |
| Deviation of the characteristic curve | ≤ 0.2 % of full-scale value | |
| Repeat accuracy | ≤ 0.1 % of full-scale value | |
| Load impedance | current output: ≤ 500 Ohm Voltage output: ≥ 1000 Ohm | |
| Temperature influence | ≤ 2 % from full-scale value (with temperature compensation) ≤ 0.2 %/K (without temperature compensation) | |
| Approvals and certificates | ||
| EAC conformity | TR CU 020/2011 | |
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | Connector M12 x 1 , 5-pin | |
| Degree of protection | IP65 | |
| Material | ||
| Housing | stainless steel (1.4305 / AISI 303) PBT plastic parts | |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam | |
| Mass | 170 g | |
