倍加福/P+F 品牌
经销商厂商性质
上海市所在地
产品阐述 | ||
---|---|---|
Single head system |
*超实惠倍加福超声波传感器*超实惠倍加福超声波传感器
General specifications | ||
---|---|---|
Sensing range | 350 ... 6000 mm | |
Adjustment range | 400 ... 6000 mm | |
Dead band | 0 ... 350 mm | |
Standard target plate | 100 mm x 100 mm | |
Transducer frequency | approx. 65 kHz | |
Response delay | 285 ms minimum 850 ms factory setting | |
Indicators/operating means | ||
LED green | solid: Power-on flashing: Standby mode or program function object detected | |
LED yellow 1 | solid: object in evaluation range flashing: program function | |
LED yellow 2 | solid: object in detection range flashing: program function | |
LED red | solid: temperature/program plug not connected flashing: fault or program function object not detected | |
Temperature/TEACH-IN connector | Temperature compensation , Evaluation range programming , output function setting | |
Electrical specifications | ||
Operating voltage | 10 ... 30 V DC , ripple 10 %SS | |
Power consumption | ≤ 900 mW | |
Interface | ||
Interface type | RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit | |
Input/Output | ||
Synchronization | bi-directional 0 level -UB...+1 V 1 level: +4 V...+UB input impedance: > 12 KOhm synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms | |
Synchronization frequency | ||
Common mode operation | max. 7 Hz | |
Multiplex operation | ≤ 7 Hz / n , n = number of sensors , n ≤ 5 | |
Output | ||
Output type | 1 current output 4 ... 20 mA 1 voltage output 0 ... 10 V | |
Resolution | evaluation range [mm]/4000, but ≥ 0.35 mm | |
Deviation of the characteristic curve | ≤ 0.2 % of full-scale value | |
Repeat accuracy | ≤ 0.1 % of full-scale value | |
Load impedance | current output: ≤ 500 Ohm Voltage output: ≥ 1000 Ohm | |
Temperature influence | ≤ 2 % from full-scale value (with temperature compensation) ≤ 0.2 %/K (without temperature compensation) | |
Approvals and certificates | ||
UL approval | cULus Listed, General Purpose | |
CSA approval | cCSAus Listed, General Purpose | |
CCC approval | CCC approval / marking not required for products rated ≤36 V | |
Ambient conditions | ||
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Connection type | Connector M12 x 1 , 5-pin | |
Degree of protection | IP65 | |
Material | ||
Housing | stainless steel (1.4305 / AISI 303) PBT plastic parts | |
Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam | |
Mass | 280 gUC6000-30GM-IUR2-V15 |