百兆POE光纤收发器-深圳市光路在线科技有限公司手机版

产品简介

百兆POE光纤收发器可用于以太网的电接口与光接口之间的转换，同时通过网线直接给后端设备供电，因此后端设备可以灵活安装而不必考虑电源布线的问题。本光纤收发器包含1个电口和1个光口，它将以太网的传输距离从铜芯双绞线的100米延长至550米（多模光纤）或120公里（单模光纤）。它可以方便地实现各种网络设备之间的互联，适用于电信、广电、宽带网络、安防监控等需要高性能、高可靠性的网络环境中。

详细介绍

支持IEEE 802.3af/at，输出功率可达50瓦
电口支持10M/100M自适应或强制为1000M
支持存储转发或直通透传模式
支持9KB超长帧
支持链路故障转移（LFP）功能
可选双纤/单纤，SFP，SC/FC/ST等各种光纤接口
拨位开关支持多种模式设置
交流100-240伏宽输入范围

Physical Port
Copper Port	10/100Base-T RJ45
SFP Port	100BASE-X SFP interfaces
Fiber Mode	100BASE-X, 550m-120km, SC/ST/FC
Parameters
Ethernet Standards	IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3x flow control and back pressure IEEE 802.3af Power over Ethernet. IEEE 802.3at Power over Ethernet enhancements standard
Packet Length	2046bytes
Transmission Mode	Store and Forward/Cut through
Exchange Property	Delay time: <> Backplane bandwidth: 20Gbps; Packet forwarding rate: 14.88Mpps
DIP Switches	LFP function:Disable/Enable Forward mode:Store and forward/Cut through Fiber Speed:FX 100MM PoE function:Disable/Enable
LED Indicator
Power	Connect-always
RJ45	Link/Act: connect-always; data exchange-twinkle
Fiber	Link/Act: connect-always; data exchange-twinkle
Fiber Speed	FX 100MM
PoE Power	48V Power-in-use
PoE Mode	PoE Output
Power Information
Power Supply	AC 100~240V, 50/60Hz
Power Consumption	Full-load<>
Physical Property
Dimensions	140mm×110mm×40mm
Installation Mode	wall-mountable
Weight	600g
Working Environment
Operating Temperature	0°C~50°C
Operating Humidity	10%~90% non-condensing
Storage Temperature	-10°C~70°C
Warranty
MTBF	50,000 hours
Defects Liability Period	1 year warranty, lifetime technical support
Certification Standard
EMC	FCC Part15 Class A CE-EMC/LVD RoHS EN61000-4-2 (ESD), EN61000-4-3 (RS) EN6100044 (EFT), EN6100045 (Surge) EN61000^1-6 (CS), EN61000-4-8 EN61000-4-11