进口超高压电磁阀

进口超高压电磁阀

参考价: 面议

具体成交价以合同协议为准
2018-05-14 09:00:00
441
产品属性
关闭
深圳中鼎凡而阀门有限公司

深圳中鼎凡而阀门有限公司

免费会员
收藏

组合推荐相似产品

产品简介

进口超高压电磁阀


:http://www.jl48.com

详细介绍

德国托克TOK品牌:进口超高压电磁阀应用范围:它广泛应用于航天、船舶重工、石油化工、测试设备、清洗设备、加湿设备、液压设备等,工作压力在100MPa以上的管道系统中。
产品特点:
阀芯均为不锈钢活塞式,活塞环不会被介质中的杂质卡死,动密封性能高,寿命长;活塞与金属阀腔不产生直接摩擦,阀体安装方向无限制;专制线圈,不易烧毁;长时间停用,动作同样灵敏;zui低启动压力1.0MPa。
主要技术参数:
 

产品规格:DN0.5~DN200
阀体材质:不锈钢
适用介质:水、气、油、燃气、腐蚀流体等
温度范围:0~+100℃
介质粘度:小于50C St(大于时需定制)
防护性能:防水、防爆(Exd IICT5)、防腐
接线方式:接线座式;引线式
控制方式:常开、常闭
电源电压:DC24~127V; AC36~380V
连接方式:内螺纹、(外螺纹和特殊接口可定做或加转接头)


工作原理:
常闭:当线圈通电时,先导阀芯吸合,先导孔打开,阀上腔卸压,活塞靠下腔介质压力推动,电磁阀打开;当线圈断电时,先导阀芯靠弹簧复位,先导孔关闭,阀腔由活塞节流孔增压和复位弹簧的推力,电磁阀关闭。
常开:当线圈通电时,先导孔关闭,阀上腔由活塞节流孔增压和复位弹簧的推力,电磁阀关闭。当线圈断电时,先导阀芯靠弹簧复位,先导孔打开,阀上腔卸压,活塞靠下腔介质压力推动,电磁阀打开。
规格尺寸:
 

产品代码GN814
公称通径DN3DN4DN5DN6DN8DN10DN12DN15
适用压力1.0~100MPa
接口螺纹G1/4G3/8G1/2G3/4
阀体材质不锈钢、304或316
特殊功能其它功能可定制


注:出口端压力大于进口端压力,介质会反向导通。可安装止回阀或订制自带止回功能的阀。
Applications: 
It is widely used in aerospace, shipbuilding Heavy Industry, petrochemical, test equipment, cleaning equipment, humidification equipment, hydraulic equipment, the work of more than 100MPa pressure pipeline system.
Features: 
Spool is stainless steel piston and piston rings will not be stuck impurities in the medium, dynamic sealing performance and long life; piston valve chamber with the metal does not produce direct friction, the valve mounting direction unlimited; authoritarian coil, easily burned ; for a long time disabled, the same movement sensitive; minimum starting pressure 1.0MPa.
Main technical parameters:
 

Specifications:DN0.5~DN200 DN0.5 ~ DN200
Body material:Stainless Steel
Medium:Water, gas, oil, gas, corrosive fluids
Temperature range:0 ~ +100 ℃
Media Viscosity:Less than 50C St (greater than the time to be customized)
Protection performance:Waterproof, explosion-proof (Exd IICT5), anti-corrosion
Wiring:Terminal Block Type; leaded
Control:Normally open, normally closed
Power supply voltage:DC24 ~ 127V; AC36 ~ 380V
Connection:Female, (male and special interfaces or add custom adapter)


How it works: 
NC: When the coil is energized, the pilot spool pull the pilot hole to open, pressure relief valve on the chamber, the piston on the lower chamber medium pressure to promote, the electromagnetic valve is opened; When the coil power, the pilot valve by the spring return, pilot hole closed throttle valve chamber pressurized by the piston return spring and thrust, the electromagnetic valve is closed. 
Normally Open: When the coil is energized, the pilot hole closed, the valve chamber and pressurized by the piston return spring throttle thrust, the electromagnetic valve is closed. When the coil power, the pilot valve by the spring return, pilot hole open, pressure relief valve on the chamber, medium pressure piston push the lower chamber, the electromagnetic valve is opened.
Size:
 

Product CodeDM814
DNDN3DN4DN5DN6DN8DN10DN12DN15
Apply pressure1.0 ~ 100MPa
nterface ThreadG1 / 4G3 / 8G1 / 2G3 / 4
Body materialStainless steel, 304 or 316
Special FeaturesOther features can be customized


Note: The outlet pressure is greater than the inlet pressure, the media will pass anti-wizard. Can be installed or custom built non-return valve function of the valve. 

上一篇:CKD电磁阀产品的功能只要以那些参数为重要? 下一篇:到底SMC电磁阀线圈具有的特点通常是什么?
热线电话 在线询价
提示

请选择您要拨打的电话: