详细介绍
描述
xm-28l1 is 1 x 10gbps port with xfp connector for triggering external devices. optimized testing include validate the functionality and performance of network and networking devices at various speed and load conditions etc.
系统特性
interface type: 1x 10gbps port with xfp connector
traffic generation capabilities:
wire-speed generation and analysis of layer 2~3 packets
single / burst / multi-burst / continuous packet generation
frame sizes from 44 to 16388 bytes
multiple address fields to cr-eate millions of unique flow
supports random ifg generation
supports 802.3x flow control
independent operation in each module
x-trailer® for data integrity verification and sequence checking
generation and response to arp and ping for layer 3 testing
extensive statistics
real-time 64-bit counters that provide detailed statistics about every aspect of the packets being transmitted / received
automatic generation of test results in tabular formats through the nustreams software suites
professional software support for interactive and/or automated tests.
主要优势
most cost-effective 10g test solution off the shelf
wire-speed generation and analysis of packets at speed up to 10gbps
optimized testing
validates functionality and performance of network and networking devices at various speed and load conditions
performs deterministic and repeatable layer 2 to layer 3 tests for the most accurate test results
customizable test program – the modules are supported by api for the development of customized test programs.
generic production test program with pre-defined templates is available to minimize development effort.
应用
nulite (interactive functional testing)
apmpt (all-purpose l2 mass production test program)
nuapi (application programming interface) for c, c++ and tcl/tk
规格
standard: ieee 802.3ae-compliant 10gbase-r (lan)
interface: pluggable xfp (ordered separay)
speed and duplex mode: 10gbps / full duplex only
preamble: 8 bytes (fixed)
frame length: 40 ~ 16,384 bytes(without crc): fixed / increment / decrement / random / loop
transmit mode: single / burst / multi burst / continuous
inter-frame gap: 9.6 nsec. ~ 1.073 sec.
unit: packets/sec, %utilization, random, databits/sec, frame bits/sec, total bits/sec, nsec, usec, msec, sec
data pattern: all zeros, all ones, custom, random, ip, udp, udp-rtp, tcp, arp, rarp, icmp, ipx, pause, 555, aaaa, incrementing byte, incrementing word, decrementing byte, decrementing word, f0f0, 0f0f, ff00, ffff0000, 0000ffff, 8-f"s 8-0"s, 8-0"s 8-f"s
error generation: crc error,ip checksum error,undersize,oversize
data integrity verification / sequence checking: yes
source / destination mac address: fixed / increment / decrement / random
source / destination ip address: fixed / increment / decrement / random
*4 / *6 support: *4
vlan stacking: up to 4 vlan tags
hardware counters: rx frames, rx bytes, undersize, oversize, broadcast, multicast, unicast, pause, vlan, mpls, *4, crc error, di checksum error, serial no. error, ip checksum error, rx arp requests, rx arp replies, rx icmp ping requests, rx icmp ping replies, rxudf 0 ~ 7, rx udf trigger, tx frames, tx bytes, tx trigger, tx queue, tx arp requests, tx arp replies
rxudf: eight trigger states are provided for counting packets that appear in specific condition.
qos testing: up to 8 priority queues
line performance: 10.3125 gbps
