特点 features:
hxd-1000tmc(2005)带计算机图像分析处理显微硬度计，它具有*的电脑自动测量系统，物镜与压头切换时自动转塔，试样打定点能精确定位，像质清晰，能自动测量压痕并显示硬度值，换算出相对应的洛氏硬度值，能满足渗碳零件的渗碳层深度的测量和曲线图、高频淬火零件的淬硬层深度的测量和曲线图等要求。该机直观性强，测量方便，减少了人为误差，大大提高了测量精度，避免了使用者的视觉疲劳。自96年在国内*推出以来，不断完善软件的升级，始终保持产品的地位。
the hxd-1000tmc (2005) micro hardness tester with picture analysis system, it is equipped with computerized measuring system, with auto-motorized turret of precision position. it displays the hv hardness or hk hardness ＆#118alues. the machine with the friendly menu combining with the convenience-measured way, reduced the artificial error, increase the accuracy of the measurment since 96 years, the latest type has occupied the leading position of the hardness tester in the country.
技术规格 main specifications
| 型号 type | hxd-1000tmc | | | 物镜/压头切换 lens/indenter switch | 自动转塔切换 with motorized turret | | | 试验力 test force | 9.807, 4.903, 2.942, 1.961, 0.9807, 0.4903, 0.2452, 0.0981 n 1000, 500, 300, 200, 100, 50, 25, 10 gf | | | 加荷方式 loading mode | 程控自动加荷,保荷和卸荷 program-controlled application, duration and removal of load | | | 保荷时间 duration time | 5 – 60 sec se-lectable, 步长 (in step of ) 5 sec. | | | 硬度测量范围 measuring range | 5 hv – 3000 hv | | | 测量显微镜 microscope | 物镜 ob-jective: 40x; 10x（观察用 for observation only）,目镜 eyepiece: 15x 总倍率 total: 600x; 150x （观察用 for observation only） | | | 显示器上倍率 magnify on tv | 约 about 1600x | | | zui小检测单位 min. detection | 0.025 µm | | | | | 测量读数方式 measuring and reading mode | 计算机自动测量图像分析，硬度软件精确修正和梯度图示。也可目镜测量。输出测量数据，采集金相图像，及硬度梯度图，并打印和保存 auto measurement, picture analysis, accurate correction, print out or save in files the measured data, image, graphs and layer hardness gradient graph.. | | | 操作系统 o s | win2000/xp | | | 试件zui大高度 max. test height | 90 mm | | | 标准配件，附件 standard attachments | 物镜ob-jective 40x,10x, 维氏压头vickers indenter (在机上built on tester) 标准硬度块 standard hardness block 薄片夹紧器 sheet specimen clamp 小圆柱体夹紧器 thin cylinder clamp 平口钳 parallel-jaw vice 打印机（内置） printer (built-in) 计算机(内装硬度测量软件) computer with mh software installed 显示器 tv display, ccd摄像头camera, 打印机 printer | | | 选购件options | 努氏压头 knoop indenter 数码相机及适配镜 digital camera & adaptor | | | 电源 power supply | 220 vac, 50/60 hz | | | 尺寸 dimensions | 外包尺寸 主机： main tester: 54 x 50 x 64 cm (packing size) | | | 毛重 gross weight | 80 kg | |
