智能制造网

ZJC-100KV电压击穿强度试验仪

一、用途：
First, the use of:
     ZJC-100KV电压击穿强度试验仪由电脑控制，数据采集方式通过光电隔离，有效解决试验过程中的抗干扰问题，软件操作使用方便，能够实时显示动态曲线，同时升压速率无级可调，可以根据自己的需要进行升压速率调节，调节范围在0.1KV-3KV/S，使升压速率真正做到匀速、准确，并能够准确测出漏电电流的数据。可实时绘制试验曲线，显示试验数据，判断准确，并可保存，分析，打印试验数据。并且能够自动判别试样击穿并采集击穿电压数据及泄露电流，同时能够在击穿的瞬间电压迅速降低自动归零。软件系统操作方便，性能稳定，安全可靠。
ZJC-100KV by computer control and data acquisition through a photoelectric isolation, effectively solve the problems of anti interference in the process of test, software is easy to operate, can real-time display dynamic curve and rate of pressure rise continuously adjustable, can according to their own needs for boost rate adjustment, the adjustment range in 0.1KV-3KV/S, so that the pressure rate truly uniform, accurate, and can accuray measure the leakage current data. Can draw the test curve in real time, display the test data, judge accuray, and can save, analysis, print the test data. And can automatically determine the sample breakdown and collect breakdown voltage data and leakage current, at the same time can be in the breakdown of the instantaneous voltage quickly reduce automatic zero. Software system is easy to operate, stable performance, safe and reliable.
二、符合标准：
Two, in line with the standard:
1、GB1408.1-2006《绝缘材料电气强度试验方法》
1, GB1408.1-2006 "electrical strength of insulating materials test method"
2、GB1408.2-2006《绝缘材料电气强度试验方法 
2, "GB1408.2-2006 electrical strength of insulating materials test methods
        第2部分：对应用直流电压试验的附加要求》
Part second: Additional requirements for tests using direct voltage "
3、GB/T1695-2005《硫化橡胶工频击穿电压强度和耐电压的测定方法》
3, GB/T1695-2005 "vulcanized rubber power frequency breakdown voltage strength and resistance to voltage measurement method"
4、ASTM D149《固体电绝缘材料工业电源频率下的介电击穿电压和介电强度的试验方法》
4. D149 ASTM test method for dielectric breakdown voltage and dielectric strength of solid electrical insulating material industrial power frequency
三、主要技术要求：
Three, the main technical requirements:
1、设备输入电压： 交流 100KV (普通试验室电源均可兼容)
1, equipment input voltage: AC 100KV (common test room power supply can be compatible)
2、试验电压方式： 交流 0--100 KV ；
2, test voltage mode: AC KV 0--100;
                        直流 0--100 KV；
DC 0--100 KV;
3、电器容量：     10KVA;
3, electric capacity: 10KVA;
4、试验方法：     0-100KV全量程可调;
4, test methods: 0-100KV full range adjustable;
5、击穿及耐压试验升压速率：
5, breakdown and pressure test boost rate:
                         0.1 KV/S 
0.1 KV/S
                         0.2 KV/S
0.2 KV/S
                         0.5 KV/S
0.5 KV/S
                         1.5 KV/S
1.5 KV/S
                           2 KV/S
2 KV/S
                         2.5 KV/S
2.5 KV/S
                         3.0 KV/S   
3 KV/S
6、试验方式：
6, test methods:
           直流试验：1、匀速升压  2、阶梯升压  3、耐压试验
DC test: 1, 2, speed boost step-up voltage 3, pressure test
           交流试验：1、匀速升压  2、阶梯升压  3、耐压试验
AC test: 1, 2, speed boost step-up voltage 3, pressure test
注：根据不同行业的标准，我们可以根据用户的要求，依据贵行业标准，为您定制行业标准所需的特殊测试功能。
Note: according to the standards of different industries, we can according to the requirements of users, according to your industry standards, for your custom industry standards required for the special test function.
7、过电流保护装置应有足够灵敏度以保证试样击穿时在0.1S内切断电源。
7, over current protection devices should have sufficient sensitivity to ensure that the sample breakdown in the 0.1S cut off the power supply.
8、漏电电流选择：    1—100 mA可由计算机软件自由进行设定。
8, the leakage current selection: 1 - 100 mA can be set free by computer software.
9、本仪器采用*的无触点原件匀速调压方式，淘汰同类产品中机械传动升压方式。
9, the instrument adopts advanced non-contact original uniform pressure adjustment method, the elimination of similar products in the mechanical transmission boost mode.
10、支持短时间内短路试验要求。(其它同类产品无此功能)
10, support short time short circuit test request. (other similar products without this feature)
11、一次试验可以同时做5个试样。(同类产品一次试验只能做一个试样)
11, a test can be done at the same time 5 samples. (similar products can only do one test sample)
12、电压测量误差：   ≤ 2％
12, voltage measurement error: = 2%
13、试验电压连续可调：0-100 KV
13, the test voltage can be adjusted continuously: KV 0-100
14、耐压时间设定：   0-6小时(可通过软件连续设定)
14, pressure time: 0-6 hours (set by software continuously set)
15、九级安全防护措施： 
15, nine security measures:
                   (1) 超压保护
(1) overpressure protection
                   (2)试验过流保护 
(2) test overcurrent protection
                   (3)试验短路保护
(3) test short circuit protection
                   (4)安全门开启保护
(4) safety door opening protection
                   (5)软件误操作保护
(5) software protection misoperation
                   (6)零电压复位保护
(6) zero voltage reset protection
                   (7)试验结束放电保护
(7) test over discharge protection
                   (8)独立保护接地
(8) independent grounding protection
                   (9)试验完成后电磁放电
(9) after the completion of test electromagnetic discharge
四、试验方式：
Four, test methods:
    1、绝缘试样空气中击穿或耐压试验
1, insulation breakdown or pressure test samples in air
    2、绝缘试样浸油中击穿或耐压试验
2, insulation breakdown or compressive specimen immersed in test
    3、绝缘试样空气中阶梯击穿或耐压试验
3, insulation breakdown voltage ladder or samples in air test
    4、绝缘试样浸油中阶梯击穿或耐压试验
4, insulation breakdown voltage ladder or specimen immersed in test
五、试验软件：
Five, test software:
    1、在试验过程中可对升压击穿过程绘制实时曲线，每次试验的升压曲线都由不同颜色构成，试验结束后可叠加对比材料的试验数据重复性。
, in the test process can boost the breakdown process in real time curve drawing, each test boost curve by different color, after the end of the test can be superimposed contrast material testing data repeatability.
    2、可以随时调取当前及历史试验数据进行查看，编辑及修改参数。
2, can at any time to obtain the current and historical test data to view, edit and modify the parameters.
    3、试验过程中可以随时修改试验条件及存储路径及自动存储试验结果。
3, the testing process can modify the test conditions and storage path and automatic storage test results at any time.
    4、试验过程中，可随时通过软件决定本次试验是否有效，方便筛选试验结果。
4, during the test, may at any time through the software determines the test is effective, convenient screening test results.
    5、可设置操作口令，做到专机专人操作，避免无关人员误操作。
5, set password, do special person operation, to avoid irrelevant personnel misoperation.
六、安全保护功能：
Six, safety protection function:
    1、试验在试验箱中进行，试验箱门打开时电源加不到高压变压器输入端，即高压侧无电压。100KV测试设备高压电极距离试验箱壁的zui近距离大于270mm，50KV测试设备高压电极距离试验箱壁的zui近距离大于250mm，试验时即使人接触箱壁也不会有危险。
, test in the test chamber were, open the door of the box test power does not come to input end of the high voltage transformer, high voltage side voltage free. 100kV test equipment for high voltage electrode distance test chamber wall of the recent distance is more than 270, high-voltage test equipment of high voltage electrode distance test chamber wall of the recent distance greater than 250mm, test even people who come in contact with the wall of the box will not be in danger.
    2、设备要安装单独的保护地线。接保护地线，主要是减少试样击穿时对周围产生的较强的电磁干扰。也可避免控制计算机失控。
2, equipment to install a separate protective ground. The protective earth wire is mainly to reduce the strong electromagnetic interference generated by the breakdown of the sample. Can also avoid the control of computer control.
    3、该试验设备的电路设有多项保护措施，主要有：过流保护、过压保护、漏电保护、短路保护、直流试验放电报警，电磁放电等。
3, the test equipment of the circuit with several kinds of protective measures, mainly has: the overcurrent protection, overvoltage protection, leakage protection, short-circuit protection, DC discharge test alarm, electromagnetic discharge.
    4、直流试验放电报警功能:在设备做完直流试验时,当开启试验门时设备会自动报警,直至使用设备上的放电装置放电后报警会自动取消.(注：因为直流试验后不放电会危险到人安全,不能直接拿取电极,起到提醒使用人员放电以免造成伤害)。
4, DC discharge test alarm function: when we finish DC test equipment. When opening the door test equipment will automatically alarm until after using the device discharge device for discharging alarm will automatically be cancelled. (Note: because DC tests on it would be dangerous to people safety to directly take electrode, to remind users discharge so as not to cause harm).
5、试验放电装置，电磁铁自动放电放置。
5, test discharge device, automatic discharge of the electromagnet.

安全事项
Voltage breakdown tester safety matters
器是高压输出设备，安装搬动使用应特别注意人身与设备的安全。请注意以下事项：
The test instrument is a high voltage output equipment, installation and transportation use should pay special attention to personal and equipment safety. Please note the following:
1 设备务必接16A单相220V交流电插座。
1 equipment must be connected to the 16A single phase 220V AC socket.
2 设备两个接地端子之一务必通过地线导线接配电箱的地线。
2 one of the two grounding terminals must be connected to the distribution box by a dedicated ground wire.
3使用前，设备两个接地端子之一务必接放电棒。
3 before use, one of the two grounding terminals must be connected to the discharge rod.
4 试验中，观察检测电流如果长时间维持在20-30mA,应立即停止试验，以免负载过大烧毁保险管。
4 test, the observation of detection current if long maintained at 20-30mA, should immediay stop the test, so as not to load too large burning of the insured.
5 一次试验完毕，务必先断掉电源，再用放电棒放掉高压输出端的剩余电荷。
5 a test finished, be sure to unplug the residual charge and then put off the high voltage output end of the bar.
6 如遇紧急情况，应立即按压“急停”按钮断电。
6 in case of an emergency, press the "emergency stop" button immediay.
7 长时间不用，断开所有电源线。
7 long time no, disconnect all power lines.
8 搬运时不能倾斜角过大，以免变压器油流出。
8 when handling can not tilt angle is too large, so as to avoid transformer oil outflow.
9 换试样前，确保已经用放电棒放过电，且电源处于断开状态。
In 9 samples, make sure you've let the electric discharge rod, and the power is disconnected.
10 测试过程如遇试样着火，务必先断电源，后灭火。
10 test process, such as the case of fire, be sure to cut off the power supply, after the fire.