KFD2-VR2-EX1.50M 德国倍加福 电压转发器 P+F安全栅
产品简介
Voltage Repeater KFD2-VR2-Ex1.50M
1-channel isolated barrier
24 V DC supply (Power Rail)
Voltage input 0 mV ... ± 50 mV
Voltage output 0 mV ... ± 50 mV
Selectable up/downsca
详细信息
德国倍加福 电压转发器 P+F安全栅
德国倍加福 电压转发器 P+F安全栅
参数表节选:的技术参数 KFD2-VR2-Ex1.50M
产品阐述 | ||
---|---|---|
Transmission range 0 mV ... ± 50 mV |
General specifications | ||
---|---|---|
Signal type | Analog input | |
Supply | ||
Connection | Power Rail or terminals 14+, 15- | |
Rated voltage | 19 ... 30 V DC | |
Ripple | within the supply tolerance | |
Rated current | ≤ 11 mA | |
Power dissipation/power consumption | 0.3 W max. | |
Input | ||
Connection | terminals 4+, 5- | |
Input resistance | min. 20 MΩ | |
Transmission range | 0 ... ± 50 mV | |
Offset voltage/current | ≤ 5 µV / ≤ 5 nA | |
Line fault detection | 100 nA | |
Output | ||
Connection | terminals 7+, 8- | |
Load | Accuracy figures for infinite load impedance. Additional 0.03 % of span for a load resistance of 10 kΩ | |
Voltage | 0 ... ± 50 mV | |
Fault signal | sensor breakage: > +100 mV (upscale), < -100 mV (downscale) | |
Output resistance | max. 3 Ω | |
Transfer characteristics | ||
Absolute | < 0.25 K at 30 V voltage supply | |
Bandwidth | DC to 350 Hz (-3 dB) | |
Rise time | ≤ 1 ms | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
Conformity | ||
Electromagnetic compatibility | NE 21 | |
Degree of protection | IEC 60529 | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Mass | approx. 125 g | |
Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 | |
Data for application in connection with hazardous areas | ||
EC-Type Examination Certificate | BASEEFA 06 ATEX 0040 | |
Group, category, type of protection | II (1)GD, I (M1) [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I (-20 °C ≤ Tamb ≤ 60 °C) , [circuit(s) in zone 0/1/2] | |
Statement of conformity | BASEEFA 09 ATEX 0219X | |
Group, category, type of protection, temperature class | II 3G Ex nA II T4 Gc [device in zone 2] | |
Directive conformity | ||
Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 | |
International approvals | ||
UL approval | ||
Control drawing | 116-0173 (cULus) or 116-0334 (cULus) | |
IECEx approval | IECEx BAS 06.0011 IECEx BAS 09.0103X | |
Approved for | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I Ex nA II T4 Gc |
General Notes Relating to Pepperl+Fuchs Product Information