进口倍福接口端子模块
产品简介
Encoder interface Binary input: D +, D-; Binary output: Cl +, Cl-
Power supply 24 V DC Power supply via power contacts 5 V DC Power supply via power contacts （KL9505）
详细信息
进口倍福接口端子模块,BECKHOFF接口端子模块
Input / Output: 2 x 16 bits of data, 2 x 8 bits of control / status
Weight 60 g about 80 g
Working / storage temperature 0 ... + 55 ° C / -25 ... + 85 ° C
Relative humidity of 95%, no condensation
Anti-vibration / impact resistance according to EN 60068-2-6 / EN 60068-2-27 / 29
Anti-electromagnetic interference / anti-electromagnetic
Current consumption is typically 20 mA, excluding encoder typical values ??of 85 mA, excluding encoders
Encoder power supply 24 V DC (-15% / + 20%) Powered by power supply contacts 5 V DC
Data transfer rate adjustable, up to 1 MHz, default is 250 kHz 1 MHz
进口倍福接口端子模块,BECKHOFF接口端子模块
Signal output differential signal (RS422)
Electrical isolation 500 V (K-bus / field potential)
K-bus current consumption 25 mA 75 mA
Bit width in process image input: 1x 32-bit data (1 x 8-bit control / status selectable)
radiation performance in line with EN 61000-6-2 / EN 61000-6-4 standard
Protection class / mounting position IP 20 / variable
Pluggable wiring is suitable for all KSxxxx bus terminal modules
Various operating modes, transmission frequency and bit
width can be permanently stored in the control register.
Shielded wire can be connected directly to the KL9195 shield terminal module.
,BECKHOFF接口端子模块