德国倍加福P+F编码器10-15631_R-1024 *现货
产品简介
Incremental rotary encoder 10-****1
Industrial standard housing ∅58 mm
Up to 5000 ppr
Servo flange, square flange or clamping flange
Special flanges with special sh
详细信息
德国倍加福P+F编码器10-15631_R-1024 *现货
| General specifications | ||
|---|---|---|
| Pulse count | max. 5000 | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| No-load supply current | max. 80 mA | |
| Output | ||
| Output type | push-pull, incremental | |
| Voltage drop | < 4 V | |
| Load current | max. per channel 40 mA , short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay | 250 ns | |
| Connection | ||
| Connector | type 42306 (M16), 6-pin type 42308 (M16), 8-pin type 9414 (M16), 5-pin type 9416 (M23), 12-pin | |
| Cable | ∅6 mm, 4 x 2 x 0.14 mm2, 2 m | |
| Standard conformity | ||
| Degree of protection | DIN EN 60529, IP65 | |
| Climatic testing | DIN EN 60068-2-3, no moisture condensation | |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose, Class 2 Power Source | |
| Ambient conditions | ||
| Operating temperature | ||
| Glass disk | -20 ... 70 °C (-4 ... 158 °F) | |
| Plastic disk | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | ||
| Glass disk | -40 ... 70 °C (-40 ... 158 °F) | |
| Plastic disk | -40 ... 60 °C (-40 ... 140 °F) | |
| Mechanical specifications | ||
| Material | ||
| Combination 1 | housing: diecast zinc flange: aluminum 3.1645 shaft: stainless steel 1.4305 / AISI 303 | |
| Combination 2 (Inox) | housing: stainless steel flange: stainless steel shaft: stainless steel | |
| Mass | approx. 335 g (combination 1) approx. 1400 g (combination 2) | |
| Rotational speed | max. 10000 min -1 | |
| Moment of inertia | ≤ 30 gcm2 | |
| Starting torque | ≤ 1.5 Ncm | |
| Shaft load | ||
| Axial | 60 N | |
| Radial | 80 N | |
德国倍加福P+F编码器10-15631_R-1024 *现货
一般特性
有效检测距离 0 ... 4 m
zui大检测距离 5.5 m
光源类型 LED
光源类型 modulated visible red light , 640 nm
偏振滤波器 是
光斑直径 approx. 200 mm at 5.5 m
发散角 approx. 2 °
功能安全性参数
平均失效时间（天） 920 a
使用寿命（...月...天） 20 a
诊断范围 0 %
指示灯/操作键
功能显示 LED yellow: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is interrupted
电气特性
工作电压 10 ... 30 V DC
输出
输出开关类型 暗通
信号输出 1 NPN, short-circuit protected open collector
与标准和规范体系的*性
符合标准
产品标准 EN 60947-5-2:2007 IEC 60947-5-2:2007