智能制造网

进口气动保温调节阀,德国TOK调节阀,进口保温调节阀德国托克TOK品牌：进口气动保温调节阀，采用顶部导向不平衡式结构，高强度、重载荷、S型流道、压降损失小、流量系数大、可调范围广、流量特性精度高。阀笼采用压紧阀座设计，解决了传统的螺纹拧入式阀座拆卸困难，泄漏量大等问题，延长了使用寿命。采用流开式设计，介质趋向于阀门开启的方向，小开度可控性好，流量特性畸变小。根据工况要求可选择降噪音、抗气蚀的特殊阀笼。与10P00相比，10P60为保温夹套型，主要应用于介质在常温下容易凝结的场合，比如介质为石蜡。保温夹套里注入蒸汽，加热介质，维持介质的流动。
控制阀参数说明：
阀内件特点： 顶部导向型
不平衡内件结构
快拆式结构
阀体类型： 直通式 
阀盖形式： 保温夹套型
流量特性： 等百分比
线性 快开
口径范围： DN15-200(1/2”-8”)
压力等级： PN1.6、4.0Mpa（ANSI 150、300LB）
泄漏等级： ASME B16.104 Ⅴ（标准型阀座）
管道连接方式： 法兰式 
适用温度范围： -45°～ 550°
执行机构类型： 气动薄膜式执行机构
气动活塞式执行机构
电动执行机构
Series heat insulation jacket single-seat control valve adopts the top guided unbalanced structure, featured by high strength, heavy load, S type flow channel, low pressure drop loss, high flow coefficient, wide adjustable range, high flow characteristic precision, etc.
The cage adopts the press-in type seat design, which solves the problems of difficult disassembly and high leakage of the traditional thread screw-in type seat and prolongs the service life. The flow to open design is adopted, and the medium flow direction tends to the opening direction of the valve with good controllability of small opening and low flow characteristic distortion. Special cages with noise reduction and anti-cavitation functions can be offered according to the requirements in different service conditions. Compared with the 10P00 Series, the 10P60 Series valves are of heat insulation jacket type, mainly used in applications where media such as paraffin may easily coagulate at normal temperature. Fill the heat insulation jacket with steam to heat the medium and maintain its flow.
Parameters of control valves：
Trim features： top guided
unbalanced trim structure
quick disassembly type structure
Body type： straight-through type
Bonnet type： heat insulation jacket type
Flow characteristic： equal percentage
linear
quick open
Size： DN15-200(1/2”-8”)
Pressure class： PN1.6、4.0Mpa（ANSI 150、300LB）
Leakage class： ASME B16.104 Ⅴ（standard type seat）
Pipe connection type： flange type
Applicable temperature range： -45C°～ 550C°
Actuator type： pneumatic diaphragm actuator
pneumatic piston actuator
electric actuator