广州市朝德机电设备有限公司

：
：郑杰克、向
： novosor     : www.novosor.com
地址：广州市越秀区朝天路66号3F

业代理德DIATEST Hermann Koeltgen GmbH孔径量仪B

产品系列：

DIAWIRELESS

DIATRON 2200 with radio module

DIAWIRELESS - wireless data transmission via real radio transmission or Bluetooth® to PC or DIATRON.

Both wireless solutions are adjusted to the DIATEST programme. Easy handling and the usual reliability of all DIATEST products are guaranteed Precision by Simplicity!

Radio transmission

• Operating time up to 4,000 hours
• Up to 2,000,000 data transmissions with 2 coin cells
• Operating distance approx. 20 m in production, up to 200 m in free field
• Electronic probes: resolution 0.1 µm
• Extremely high precision: ca. 0.2 µm with linearization
• Eletronic probes: travel 4 mm
• Measured value can be seen on the holder
• Configuration: norminal size mm/inch, auto-power-off
• Type of measurements: min, max, difference, average
• Free Software for data evaluation in Excel
• Easy to use

Bluetooth

• Analogue and digital display of readings
• Up to 7 measurements can be displayed at the PC
• Up to 7 hours continuous data stream
• Resolution up to 0.1 µm
• Electronic probe: digital probe with 10 mm travel
• Type of measurements: static, max., min., difference
• User information: work piece good / not good, change of battery via coloured LED on holder
• Configuration: nominal size, tolerance limits, adjustable ratio, measurement direction, auto-power-off

Outside Diameter Gauge

AMG

ODV

AMG

• Self-centring outside diameter gauge
• Used with mini fixture
• Measuring range: 5 mm to 25 mm/0.2“ to 1“
• Smaller diameters from 1 mm and special designs on request
• Simple calibration with setting discs
• Tungsten carbide contacts
• Repeatability: <= 0.001 mm/ 0.00005“

ODV

• Adjustable snap gauge
• Hand-held gauge
• Application range: 12 mm to 82 mm/0.5“ to 3.25“
• Measuring range: 6.35 mm/0.25“
• Ceramic anvils
• Anti-magnetic design
• Repeatability: <= 0.002 mm/ 0.00008“

Dial Indicator Tester

• Manual checking of indicators
• Travel: 30 mm/1.18“
• Basic elements with clearance free bearing
• Accessories for test indicators and indicators with longer travel （50 mm/80 mm）
• Collet for comparison gauge （e.g. Heidenhain）: stem dimension Ø 8 mm, max. height: 150 mm

Crankshaft Gauge

• For checking crankshafts and bearings in situ
• Checking for e.g. radial deviation of crankshaft, bearing clearance etc.
• Application range: web distance 45 mm to 500 mm/ 1.8“ to 19.7“

Checking Stands

MST-58

General

• Suitable for use with DIATEST bore gauges （e.g. split-ball probes） for serial measuring of small parts
• Also suitable in connection with special applications, favoured for use together with DIATEST floating holders

Checking stand MST58

• Measuring stroke adjustable from 0 to 33 mm/1.3“
• Platen: Ø 58 mm/2.3“
• Top of stand continuously adjustable

Maximum height of work-piece including gauge: 140 mm/5.5“
Accessories: clamp-on-vee attachment for positioning of work-piece

Universal stand MST102

• Measuring stroke adjustable from 0 to 130 mm/5.1“ with stop
• Size of platen: 100 mm x 100 mm/4“ x 4“ （larger platen available in standard programme）
• Different jib arms to hold measuring system
• Extensive range of accessories in standard programme

Mini fixture KM

• Especially suitable for measuring small work-pieces in combination with BMD plugs
• Optimal position due to possibility for adjustments and accessories,
• model as gauging station with several mini fixtures side-by-side.
• Suitable for multi-plane plugs

Floating Holders

SH-T

SH-BMD-50 （left）, SH-BMD-20 （right）

Floating holders compensate position errors

SH-T

• Floating holder for split-ball probes
• Floating only in one axis
• Especially suitable for small split-ball probes in combination with MST
• Float range: 0 to 1.5 mm/0.06“ continuously adjustable and 3 mm/0.1“ maximum, non variable
• Thread connection: M6 x 0.75

SH-BMD20

• Floating holder for gauging fixtures, suitable for BMD gauge
• Thread connection: M6 x 0.75

SH-BMD30

• Floating in one axis and angular compensation: ± 0.5 mm/tilt angle approx. 3°, suitable for BMD gauge
• Thread connection: M6 x 0.75 or M10 x 1

SH-BMD50

• Floating holder for automatic gauging in machines with BMD gauges
• Max. float range: ± 0.75 mm
• Option: air supply, fine adjustment for electronic probes
• Weight compensation for horizontal application
• Impact safety recoil
• Mounting possibility for proximity switch
• Thread connection: M10 x 1

Offset Heads

• Standard accessories for use in gauging fixtures
• Wide range of applications, built-in holders for gauging fixtures, 90° attachments, extensions, rotary adaptors etc.

Setting Ring Gauge

DIN2250-C

Setting ring gauge: according to company standard or DIN2250-C