| Input Specifications |
• Voltage:
| 115/230 VAC |
| • Frequency: | 47 Hz to 63 Hz |
| • Input current: | 10 amps maximum / 115 Vrms, 60Hz,
5 amps maximum / 230 Vrms, 50Hz. |
| |
| Output Specifications |
| • Over-voltage protection: | +5V: 6.5V (maximum);
+3.3V: 4.6V (maximum);
+12V:15.5V (maximum) |
| • Over-current protection: | +3.3V:70A maximum;
+5V:60A maximum;
+12V:28A maximum |
| • Remote ON/OFF control: | The power supply shall accept a logic collector level which
will disable / enable all output voltage (excluding +5V standby). |
| • Power good signal: | 115/230V (full load) : 100 - 500 ms |
| |
| General Specifications |
| • Efficiency: | 65% min. |
| • Hold-up time: | 16.6 ms minimum: at 115V / 60 Hz,
20.0 ms minimum: at 230V / 50 Hz. |
| |
| Environmental Specifications |
• Operating conditions:
| ambient temperature 0°C~25°C |
• Storage and
shipping conditions: | ambient temperature -20°C~+65°C |
| • Dielectric withstand: | input / output 1800 VAC for 1 second,
input to frame ground 1800VAC for 1 second |
