智能制造网

DXG-W-T-80型自动换模冲孔机
   DXG-W-T-80 automatic die changing punching machine
1、 DXG-W-T-80是用于管料外冲孔专用加工设备，可对直径在Ф80以下的钢管、铜、铝管进行加工。
2、 本机采用人工插管，机器自动分度、自动换模、自动冲孔等动作。
3、 机器自带刀库可安装8种不同的冲模和凹模，可自动调用刀库内的冲模和与之对应的凹模冲裁不同孔径，这样可大大节省换模的时间提高生产效率，特别适用于需要在一根管材上冲不同孔径不同分布角度的产品。
 
1. The DXG-W-T-80 is processing equipment used for the punching of external tubes, and can be used to process steel, copper and aluminum tubes with diameter of less than 80mm.
 
2. The machine adopts manual tube inserting for automatic indexing, mold changing and punching.
 
3. The machine is equipped with tool library where eight different dies can be installed. The punch dies and their corresponding female dies in the tool library can be automatically called to blank holes of different diameters, which can greatly save time of die changing to improve production efficiency, especially applicable to products which holes with different diameters and distribution angles need to be punched on one tube.