顺序波长色散X射线光谱仪
产品简介
详细信息
顺序波长色散X射线光谱仪WDX-4000主要特点：
的测角仪的设计
●创新和火成钢皮带传动系统。这种的设计提供了无摩擦，没有反弹，稳定的运动，保证确的角度定位。
●8/28轴有独立的驱动系统和伺服电机编码器反馈
●永磁同步电机（PMSM）提供、最平稳的运动
●光学编码器0.0001°分辨率和0.0006°精度保证集成系统达到优良的性能。
多通道分析仪
●12位，80msps，大的AD采样系统、完整、准确地记录信号
●4096（12bit）通道分析仪基于高速FPGA架构和强大的DSP算法能够区分正确的X射线从噪声和杂散光
●能量色散作用是额外的。
ray Tube高压发生器
●标准功率kw系统给出了痕量元素的分析灵敏度和较高速度的分析
●薄铍窗（50um或75um）提供了X射线超传输，特别是低能量区
●60kV及140ma，（75kv 150mA是可选的）和灵活的设置有助于更精细的分析方法
●双循环水冷却系统，去离子水的电导率保持比1us由管寿命的树脂增加尽可能低的多。
顺序波长色散X射线光谱仪WDX-4000规格参数
| Multi-channel Analyzer | 12bit, 80Msps AD. 4096 channels analyze ability |
| with FPGA hardware and robust DSP algorithm | |
| to discriminate signal and noise | |
| Maximum count rate | FPC:2Mcps SPC:1Mcps SC: 1.5Mcps |
| Pulse shift & Gain correction | Automatic |
| Dead time correction | Automatic |
| Sample Chamber | X-ray tubeMg | ||||
| Type | Vacuum for solids | Windows | The thin beryllium window, 50um | ||
| Dimensions | 51.5mm Øx40mm height, max. | or 75um, ultra-high transmission | |||
| Weight | Max. 500g including sample holder | Rhodium (Rh) as standard, option | |||
| Dual position with anti-dust filter & | |||||
| Anode target material | includes Copper (Cu), | ||||
| Sample loading | pre-vacuum pumping as standard | Molybdenum (Mo), Tungsten (W), | |||
| feature. Analyzing one sample | Chromium (Cr), Platinum (Pt) | ||||
| while pumping the next one | |||||
| Sample changer | Automation robotic changer system, | Operation | Tube remains powered on during | ||
| high capacity up to 168 samples | sample holding | ||||
| 3 spinning speed modes | Dual tube cooling water circulation, | ||||
| Spinner | Cooling water | conductivity of deionized water is | |||
| (low, medium, high) | |||||
| much lower than 1uS | |||||
| HV Generator | Rating | ||||
| Output | Selectable in steps of 1KV, 1mA | Power | |||
| as standard. Fine step is optional | 4kW | ||||
| by 12bit DA | |||||
| Long Term Stability | 0.01%/8 hours | KV/mA | 20-60KV, 75kV is optional | ||
| Temperature Coefficient | 50 ppm/°C (20 ppm/°C optional) | 10-140mA, 150mA is optional | |||
| Goniometer | Optical Path | ||||
| Innovative steel-belt-drive system, | Channels masks | Single mask | |||
| Type | no friction, no backlash, | (fixed 27, 30 or 37mm) | |||
| feedback by optical encoder, | Primary collimators | 3 max: 100, 150, 300, 550, | |||
| 0/20 independent | 700 or 4000 um, selectable | ||||
| Maximum slewing speed | 6000 • 20/min | Primary beam filters | 4 max: Pb, Al, Cu with different | ||
| thickness | |||||
| Angular accuracy | Crystals | 8 max: LiF420, LiF220, LiF200, | |||
| 0.003° 0 and 20 | Ge111, PE002, lnSb, TIAP, | ||||
| multilayers for light element | |||||
| Angular reproducibility | 0.0002° 0 and 20 | 3 max: Flow proportional | |||
| Detector | counter (FPC), Sealed Xe | ||||
| Step scan range | Min. 0.0001°, Max.1° | proportional counter (SPC), | |||
| Scintillation counter (SC) | |||||
| Scanning angle range | PC:17° to 146°20 | Optical Cabinet Past | Vacuum < 10Pa | ||
| SC: 0° to 120°20 | |||||