智能制造网

1.1 产品拓扑图

1.3 Product topology

1.3.1搭配ATC450-C方案

1.3.1 With ATC450-C scheme

1.3.2搭配ATC600方案

1.3.2 With ATC600 scheme

1.2 产品安装

1.4 Product Installation

1.4.1 触摸屏安装方法

1.4.1 Installation method of touch screen

ATP系列无线测温系统使用的触摸屏采用面板嵌入式安装，产品尺寸及安装开孔尺寸如图1.1、图1.2所示。安装方法见图1.3。

Touch screen ATP series wireless temperature measurement system uses panel embedded installation. The product size and installation hole size are shown in Figure 1.1 and Figure 1.2. The installation method is shown in Figure 1.3

图1.1 ATP007触摸屏开孔尺寸（单位mm）

Figure 1.1 hole size of atp007 touch screen (unit: mm)

图1.2 ATP010触摸屏开孔尺寸（单位mm）

Figure 1.2 hole size of atp010 touch screen (unit: mm)

图1.3 触摸屏安装方法

Figure 1.3 installation method of touch screen

1.4.2 无线温度收发器的安装

1.4.2 Installation of wireless temperature transceiver

无线测温收发器，可以采用导轨（DIN35mm）安装方式，也可以使用螺栓固定方式，如图1.4、图1.5所示。

The wireless temperature measurement transceiver can be installed by guide rail (din35mm) or bolt fixing method, as shown in Figure 1.4 and Figure 1.5.

图1.4  ATC450-C无线温度收发器外形及安装示例

Figure 1.4 appearance and installation example of wireless temperature transceiver

图1.5 ATC600无线温度收发器外形及安装示例

Figure 1.5 appearance and installation example of wireless temperature transceiver

1.4.3 无线温度传感器的安装

1.4.3 Installation of wireless temperature sensor

无线温度传感器共有多种型号，分别对应磁吸固定、螺栓固定、表带固定、合金片固定等安装方式。

Wireless temperature sensor has a variety of models,part are magnetic absorption fixation, bolt fixation, strap fixation, alloy plate fixation and other installation method.

图1.6 表带式无线温度传感器ATE200/200P 

Figure 1.6 Belt wireless temperature sensor ATE200/ATE200P

图1.7 磁吸式无线温度传感器ATE100M        图1.8螺栓式无线温度传感器ATE100/100P

Figure 1.7 Magnetic wireless temperature sensor ATE100M  Figure 1.8 Bolted wireless temperature sensor ATE100/100P

图1.9 无源无线温度传感器ATE400

Figure 1.9 passive wireless temperature sensor ATE400