智能制造网

Built Specifically For Rough Terrain Work

• Single center bar and wide, open design give an improved view of the fork tips.
• Six load rollers assure smooth movement.
• Four side-thrust rollers absorb lateral loads, contributing to long carriage life.
• Four bronze pads curb carriage rattle when traveling without a load.
• Optional side-shift carriage offers additional load handling precision.

Tough, Productive Masts

• Standard and Full Free Lift Triple masts for all models.
• Lift heights from 10 to 30 feet （3 to 9 m）.
• Wide stance provides a rigid structure that resists bending stresses.
• Combination roller/polyethylene block design results in a smooth-operating, easily-adjusted mast.
• Forward tilt limit control helps to avoid tilting to an unsafe position. Override switch allows a tilt of more than 5° for transport only,. Back tilt not affected.

Responsive Hydraulics Speed Your Work

• Gear pump supplies up to 23 gal （87 liters） a minute.
• Priority flow to steering for less steering effort.
• Stackable control valve makes it easy to add sections for attachments.
• Anti-cavitation valve assures smooth operation of the tilt circuit.
• Flow control valve provides controlled descent if the lift circuit fails.
• Replaceable 10-micron filter helps maintain clean fluid for longer hydraulic component life.
  

More Lifting Capacity In High Lift

Noble Rough Terrain Lift Trucks retain more lifting capacity in high lifts than other rough terrain trucks. This means fewer lifts with heavy loads. Sometimes you may be able to use a smaller truck for your application.

（Ratings are to American National Standards Institute （ANSI） B56.6-1993, Part III, Safety Standards for Rough Terrain Fork Lift Trucks. They are for lift trucks with standard drive tires. Capacities in pounds are based on a 24-inch center; those in kilograms on a 500 mm load center.）

Easy For Your Operator To Do The Job

• Power shuttle transmission lets the operator change directions on-the-go （up to 5mph/8kmh）.
• Inching pedal allows the truck to ease forward at full engine speed and precisely place a load.
• Compact size and a tight turning radius help your operator maneuver easily on crowded job sites. Low-effort power steering minimizes operator fatigue.
• Spring mounting of the steer axle helps absorb road shock, providing a comfortable ride over rough terrain.
• Wide-stance mast improves through-the-mast visibility.
• Your operator sits high and off center. With plenty of head, leg and elbow room, it's easy to get on and off from either side.
• Durable, vinyl-covered seat readily sheds water.
• Thick, firm cushions comfortably support your operator. An optional suspension seat provides even greater cushioning. Seat belts are standard and should be worn at all times.
  

Easy To Maintain

• Mast slider blocks adjust without mast disassembly.
• Handy brake bleeders on the front of the cowl （4-wheel drive and towable 2-wheel drive models）.
• Easily accessible fuse panel at the base of the steering column.
• Easy-to-reach lube fittings on steer axle.
• Hood removes by pulling just four bolts.
• Floorplates lift out for easy access to transmission, control valve and hydraulic pump.
• Precleaner extends filter life by removing large particles before they read the air cleaner.
  

R-Series machines are designed to make daily service checks and routine maintenance convenient and easy. You can reach all check and service points from the ground:

• Air cleaner with visual indicator
• Engine oil level dipstick
• Engine oil fill
• Coolant level sight bottle
• Coolant fill
• Hydraulic fluid level